Solved

Cisco route: Adding routes, saving config and restoring from saved config?

Posted on 2015-02-24
2
165 Views
Last Modified: 2015-02-24
hi guys,

We have a Cisco 3570x router. Within there are some VLAN's, of which I am part of this network 192.168.13.0/24. There's another VLAN of 192.168.11.0/24.

I can telnet to each of the gateways 192.168.13.1 and 192.168.11.1 and I can see the routes by typing 'show ip route'.

Now, I would like to add a route for both these networks. So as an example, I'd like anyone from 192.168.13.0/24 to be able to access 10.0.20.0/24 via 172.25.241.254.

My questions are:

1. How do I add these routes and then save that configuration to the router?
2. How can I backup this routers configuration?
3. How can I restore this routers configuration from the backup?

Thank you
Yashy
0
Comment
Question by:Yashy
2 Comments
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 40628181
1. How do I add these routes and then save that configuration to the router?
From privileged mode:
conf t
ip route 10.0.20.0 255.255.255.0 172.25.241.254
end
copy run start

Open in new window

2. How can I backup this routers configuration?
3. How can I restore this routers configuration from the backup?
There are a few ways that you can do this.  The quick and dirty method is to display the running-config (show run) and then copy the output to a text editor and save it as a text file on your computer.  Or you can copy the config via TFTP to a TFTP server (FTP can also be used).  Cisco doc on backing up and restoring configs.
0
 
LVL 1

Author Closing Comment

by:Yashy
ID: 40628210
Thank you Don:)
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
PRTG Network Monitor lets you monitor your bandwidth usage, so you know who is using up your bandwidth, and what they're using it for.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question