Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people, just like you, are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
Solved

WDS Server

Posted on 2015-02-24
1
180 Views
Last Modified: 2015-03-12
Hello Guys,

I am bit stuck with WDS server problem, I have build  and configured the WDS server on my Exi 4.0 server ( on virtual machine )  it is working fine.
But when I   capture  the image on my build computer and click the upload captured image on WDs server. it comes up with error.
The  path cannot found. i tired using Server IP address and even server Name but no success.  I tired Shit +F10 key  for command prompt and  can not even ping the WD_server. ( WDS is virtual machine on EXI4.0 server )
Can any one help what is the reason

Thanks in advance.
Regards
Ramay
0
Comment
Question by:Asif Naeem
1 Comment
 
LVL 80

Accepted Solution

by:
David Johnson, CD, MVP earned 500 total points
ID: 40628744
you need to add the network driver to the windows pe (boot.wim).. a quick check is using ipconfig to ensure that you are getting a valid ip address.

dism /add-driver /driver:<pathtodrivers>
A complete walkthrough is available @ https://community.landesk.com/support/docs/DOC-29823
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When rebooting a vCenters 6.0 and try to connect using vSphere Client we get this issue "Invalid URL: The hostname could not parsed." When we get this error we need to do some changes in the vCenter advanced settings to fix the issue.
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…

860 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question