Missing Cmdlets Exchange 2010

Exchange Server 2010 SP3 RU8 Enterprise 64 Bit
Windows 2008 R2 64 bit

The following commands are not found

Set-MailboxComplianceConfiguration –Identity JSmith –RetentionAutoTaggingEnabled $True

Get-MailboxComplianceConfiguration –Identity JSmith

All my research shows this a valid command

https://technet.microsoft.com/en-us/library/bb124413(EXCHG.140).aspx

It even is showed in the link above

What am I missing
LVL 23
Thomas GrassiSystems AdministratorAsked:
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Will SzymkowskiSenior Solution ArchitectCommented:
You do not see this cmdlet because you probably do not have the appropriate permissions.

See the below TechNet for proper assignment of permissions for this cmdlet.
https://technet.microsoft.com/EN-US/library/73d02309-f925-43c5-8599-74c4f61edfff(EXCHG.140).aspx

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Logged on to  the server as administrator  

Administrator does not have the proper assignments?

Which assignments do I need?


Ran this

[PS] C:\Windows\system32>get-rolegroupmember "organization management"

Name                                                        RecipientType
----                                                        -------------
Exchange Organization Administrators                        Group
Administrator                                               UserMailbox


[PS] C:\Windows\system32>get-rolegroupmember "recipient management"

Name                                                        RecipientType
----                                                        -------------
Exchange Recipient Administrators                           Group


[PS] C:\Windows\system32>get-rolegroupmember "records management"
[PS] C:\Windows\system32>
0
Will SzymkowskiSenior Solution ArchitectCommented:
In the link I have provided at the bottom of the TechNet you will see Detailed Description. From there click that link which sends you here.
https://technet.microsoft.com/EN-US/library/dd638205(v=exchg.140).aspx

You can then see a table of the Groups that you need to be part of before you can see this cmdlet. Once you have assigned your account to the appropriate groups close the Exchange Management Shell and then re-open it.

Will.
0
Making Bulk Changes to Active Directory

Watch this video to see how easy it is to make mass changes to Active Directory from an external text file without using complicated scripts.

Thomas GrassiSystems AdministratorAuthor Commented:
Will

Thanks

I was already on that page

Which feature do I need?  I am thinking Applying retention policies
0
Will SzymkowskiSenior Solution ArchitectCommented:
That is correct. The command above is for retention policies.
So you would need to be part of the following groups.
Organization Management
Recipient Management
Records Management


Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

[PS] C:\Windows\system32>get-rolegroupmember "organization management"

Name                                                        RecipientType
----                                                        -------------
Exchange Organization Administrators                        Group
Administrator                                               UserMailbox
Me                                                                   UserMailbox


[PS] C:\Windows\system32>get-rolegroupmember "recipient management"

Name                                                        RecipientType
----                                                        -------------
Exchange Recipient Administrators                           Group
Administrator                                               UserMailbox
Me                                                                  UserMailbox


[PS] C:\Windows\system32>get-rolegroupmember "records management"

Name                                                        RecipientType
----                                                        -------------
Administrator                                               UserMailbox
Me                                                                   UserMailbox


Exited from the EMS  

[PS] C:\Windows\system32>Get-MailboxComplianceConfiguration -Identity usera
get-MailboxComplianceConfiguration : The term 'Get-MailboxComplianceConfiguration' is not recognized as the name of a
cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify
that the path is correct and try again.
At line:1 char:1
+ Get-MailboxComplianceConfiguration -Identity usera
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : ObjectNotFound: (Get-MailboxComplianceConfiguration:String) [], CommandNotFoundException
    + FullyQualifiedErrorId : CommandNotFoundException

Thoughts
0
Will SzymkowskiSenior Solution ArchitectCommented:
Have you tried to logout of your account completely and log back in?

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Just restarted my computer logged back onto to my domain network

Same error as above.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

tried to do  help Get-MailboxComplianceConfiguration

same thing can not find

did a update-help      still no luck
0
Will SzymkowskiSenior Solution ArchitectCommented:
Very strange. If you are part of those groups you should have no issues performing those tasks and getting access to that cmdlet. Is your AD replication working as expected? If you create a test user and provide the same permissions does this work?

Do not copy your account when you are doing this test.

Also if you run the get-pssnapin in the ESM is the Microsoft.Exchange.Management.Powershell.E2010 present in the session?

If this is it comes down to a permission issue. When you do not have the appropriate permissions cmdlets are not visible in the Shell.

Also are you able to restart the info store service on the exchange server?

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Yes my AD is good and working.

Anywhere in adsiedit I can look for this information?


This pssnapin was from my computer

[PS] C:\Windows\system32>get-pssnapin


Name        : Microsoft.PowerShell.Core
PSVersion   : 3.0
Description : This Windows PowerShell snap-in contains cmdlets used to manage components of Windows PowerShell.




This pssnapin is from the server

[PS] C:\Windows\system32>get-pssnapin


Name        : Microsoft.PowerShell.Diagnostics
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains Windows Eventing and Performance Counter cmdlets.

Name        : Microsoft.WSMan.Management
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains cmdlets (such as Get-WSManInstance and Set-WSManInstance) that a
              re used by the Windows PowerShell host to manage WSMan operations.

Name        : Microsoft.PowerShell.Core
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains cmdlets used to manage components of Windows PowerShell.

Name        : Microsoft.PowerShell.Utility
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains utility Cmdlets used to manipulate data.

Name        : Microsoft.PowerShell.Host
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains cmdlets (such as Start-Transcript and Stop-Transcript) that are
              provided for use with the Windows PowerShell console host.

Name        : Microsoft.PowerShell.Management
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains management cmdlets used to manage Windows components.

Name        : Microsoft.PowerShell.Security
PSVersion   : 2.0
Description : This Windows PowerShell snap-in contains cmdlets to manage Windows PowerShell security.


I have an MS update to apply to the server which requires a restart not till the weekend

Thoughts
0
Will SzymkowskiSenior Solution ArchitectCommented:
The only reason why you would not get cmdlets appear in the ESM is from permissions not assigned or modules / snapins are not loaded into the session.

Try opening the ESM and running the below command..
Add-PsSnapin Microsoft.Exchange.Management.Powershell.E2010

Then try running the command again. If this does not work you may need to wait until you can restart the Exchange info store.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

[PS] C:\Windows\system32>get-pssnapin


Name        : Microsoft.PowerShell.Core
PSVersion   : 3.0
Description : This Windows PowerShell snap-in contains cmdlets used to manage components of Windows PowerShell.

Name        : microsoft.exchange.management.powershell.e2010
PSVersion   : 1.0
Description : Admin Tasks for the Exchange Server

it failed again

Looks like a restart is going to be next.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Just applied update to the windows server and restarted the server and exchange.

Still do not have this command

I have this one also open  and that's why I opened this question
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_28624757.html

When I did a help again still not found

I really think the cmdlet is missing

Where are they kept?

Any thoughts
0
Will SzymkowskiSenior Solution ArchitectCommented:
Do you have another Exchange Server you can run these commands on to test?

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Noonly have one sorry
0
Thomas GrassiSystems AdministratorAuthor Commented:
Still trying to figure this out.

Am I really missing this cmdlet?

Where do I find the cmdlets?  Are they located in a folder somewhere?
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Is this a permissions issue?

My research seems to point to that on this site found several issues related to this all talking about permissions
PSSnapin etc.

What am I missing?
0
Will SzymkowskiSenior Solution ArchitectCommented:
Yeah it is most likely a permissions issues as i stated in eariler posts. When cmdlets are not available there are only a few reasons why.

- Do not have appropriate permissions
- modules or snapins are not imported into the session

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Not sure if I do have the correct permissions.

I have two accounts the administrator and my user account.

They both should have all the permissions required to run or do functions.

Is there a script some where that will apply all permissions for a user account?

add-rolegroupmember "organization management" -identity "me"
add-rolegroupmember "Recipient Management" -identity "me"
add-rolegroupmember " Records Management" -identity "me"

I added myself and administrator to the above groups.

What else do I need to be added to?

Thoughts
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

These are all the Role Groups I found

              Role Groups

Organization Management      ***

View Only Organization

Recipient Management             ***

UM Management

Help Desk

Hygiene Management

Records Management                     ***

Discovery Management

Public Folder Management

Server Management

Delegated Setup


My account and Administrator are in groups with ***

Have not checked the other groups will do later today.

What other permissions do I need?
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will


Here is all the permissions I could find

Organization Management

Name                                                        RecipientType                                              
----                                                        -------------                                              
Exchange Organization Administrators                        Group                                                      
Administrator                                               UserMailbox                                                
Thomas R. Grassi Jr                                         UserMailbox                                                


View Only Organization


[PS] C:\Windows\system32>get-rolegroupmember "view only organization"
The operation couldn't be performed because object 'view only organization' couldn't be found on
'tgcs011.our.network.tgcsnet.com'.
    + CategoryInfo          : InvalidData: (:) [Get-RoleGroupMember], ManagementObjectNotFoundException
    + FullyQualifiedErrorId : 2E508258,Microsoft.Exchange.Management.RbacTasks.GetRoleGroupMember
    + PSComputerName        : tgcs025.our.network.tgcsnet.com


Recipient Management  

Name                                                        RecipientType                                              
----                                                        -------------                                              
Exchange Recipient Administrators                           Group                                                      
Administrator                                               UserMailbox                                                
Thomas R. Grassi Jr                                         UserMailbox                                                


UM Management

NONE

Help Desk

NONE

Hygiene Management

NONE

Records Management  

Name                                                        RecipientType                                              
----                                                        -------------                                              
Administrator                                               UserMailbox                                                
Thomas R. Grassi Jr                                         UserMailbox                                                


Discovery Management

Name                                                        RecipientType                                              
----                                                        -------------                                              
Administrator                                               UserMailbox                                                


Public Folder Management
Name                                                        RecipientType                                              
----                                                        -------------                                              
Exchange Public Folder Administrators                       Group                                                      


Server Management

NONE


Delegated Setup


NONE



What I am missing?
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Just ran test-systemhealth

test-systemhealth

WARNING: Active Directory server serv011.our.network.tgcsnet.com is down or unreachable. This error could also be the
result of a network or permissions problem. Error: Access is denied. (Exception from HRESULT: 0x80070005
(E_ACCESSDENIED))
WARNING: Active Directory server serv011.our.network.tgcsnet.com is down or unreachable. This error could also be the
result of a network or permissions problem. Error: Access is denied. (Exception from HRESULT: 0x80070005
(E_ACCESSDENIED))


But the event 2080

Event 2080


Log Name:      Application
Source:        MSExchange ADAccess
Date:          2/22/2015 9:07:17 PM
Event ID:      2080
Task Category: Topology
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      serv025.our.network.tgcsnet.com
Description:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=1332). Exchange Active Directory Provider has discovered the following servers with the following characteristics:
 (Server name | Roles | Enabled | Reachability | Synchronized | GC capable | PDC | SACL right | Critical Data | Netlogon | OS Version)
In-site:
serv012.our.network.tgcsnet.com      CDG 1 7 7 1 0 1 1 7 1
serv011.our.network.tgcsnet.com      CDG 1 7 7 1 0 1 1 7 1
 Out-of-site:
 


serv012 Windows 2003 PDC holds all AD Roles
serv011 Windows 2003 PDC

Could this be the issue?  You did ask about if AD was good.

I thought with the 2080 message it meant it was good.

Thoughts


Side note

tried this test-systemhealth >>c:\temp\sh.txt      still sent all output to console

Strange things going on here
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

skip that last message

I need to run this

test-systemhealth -adcredentials $c -verbose | fl

instead of this

test-systemhealth

Needed the active directory credentials
Still can't get it to pipe to a file

Thoughts
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will


Any way to tell if the cmdlet is truly on the system or not?
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Still struggling with this one

Any thoughts?
0
Will SzymkowskiSenior Solution ArchitectCommented:
Yeah other then the above what i have listed this should be the only thing stopping the command from showing up.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Thanks for stopping by.

What else can I check?
0
Will SzymkowskiSenior Solution ArchitectCommented:
Do you have another environment where you can see if you can re-produce this issue? As side from what i have listed the most probable cause for cmdlets not appearing in the ESM is from Permission restrictions and/or modules/snaping not in the powershell session.

That is really all i can offer, based on the info provided.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

No such luck with that

The snap-ins are there  

the command is still not there?

So if the snapins are there then what permission is missing?
0
Will SzymkowskiSenior Solution ArchitectCommented:
You had stated that you had the appropriate permissions
Organization Management
Recipient Management
Records Management

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Yes

Added myself and administrator

Neither one can find the cmdlet?

I run EMC on the server windows 2008 with Exchange running  and on my Computer Windows 7

No luck

If we can not get these cmdlets to work my main goal here is to get the stats from the retention policy

The cmdlets sem to display that information per mailbox.

Any thoughts on that?
0
Thomas GrassiSystems AdministratorAuthor Commented:
will

update

Was working on a script and in the script it was trying this command

add-pssnapin Microsoft.Exchange.Management.Powershell.Admin

When it runs it is not found not installed on this server.

could this be the problem?

Where can I get this pssnapin?
0
Will SzymkowskiSenior Solution ArchitectCommented:
The snapin you are referring to is for Exchange 2013 not 2010. 2010 snapin is Microsoft.exchange.management.powershell.E2010. This is the one you use for Exchange 2010.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
will

Thanks

Thought I might have found something

The search continues on this one
0
Will SzymkowskiSenior Solution ArchitectCommented:
No worries man.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

If we cant find this cmdlet

is there a way to report the information from the retention policies?

Would like a report that can be emailed to the users showing how many messages were deleted etc.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Should I open a new question on this?

The main reason for this question was to run this cmdlet  "Get-MailboxComplianceConfiguration –Identity JSmith"
Which would show the information of number of messages to be deleted etc.

Without this command I need a way to produce reports of this type of information

Still wondering why I do not have this cmdlet
0
Will SzymkowskiSenior Solution ArchitectCommented:
Yeah that might be the best method. I have followed all of the steps in my lab and i have access to this cmdlet.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

I ran this

[PS] C:\Windows\system32>test-systemhealth -adcredentials $c -verbose | fl


 VERBOSE: [23:18:36.591 GMT] Test-SystemHealth : Initializing Active Directory server settings for the remote Windows
 PowerShell session.
 VERBOSE: [23:18:36.595 GMT] Test-SystemHealth : Active Directory session settings for 'Test-SystemHealth' are: View
 Entire Forest: 'False', Default Scope: 'our.network.tgcsnet.com', Configuration Domain Controller:
 'tgcs012.our.network.tgcsnet.com', Preferred Global Catalog: 'tgcs011.our.network.tgcsnet.com', Preferred Domain
 Controllers: '{ tgcs011.our.network.tgcsnet.com }'
 VERBOSE: [23:18:36.595 GMT] Test-SystemHealth : Runspace context: Executing user: our.network.tgcsnet.com/Users/Thomas
 R. Grassi Jr, Executing user organization: , Current organization: , RBAC-enabled: Enabled.
 VERBOSE: [23:18:36.596 GMT] Test-SystemHealth : Beginning processing &
 VERBOSE: [23:18:36.601 GMT] Test-SystemHealth : Instantiating handler with index 0 for cmdlet extension agent "Admin
 Audit Log Agent".
 VERBOSE: [23:18:36.610 GMT] Test-SystemHealth : Current ScopeSet is: { Recipient Read Scope: {{, }}, Recipient Write
 Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive Recipient Scope(s):
  {}, Exclusive Configuration Scope(s): {} }
 VERBOSE: Testing System Health.
 VERBOSE: [23:18:40.530 GMT] Test-SystemHealth : Resolved current organization: .

WARNING: The PowerShell virtual directory 'PowerShell-Proxy (Default Web Site)' has been configured to require SSL.
 This can cause the Exchange Management Tools to fail to connect.

 WARNING: The path for the PowerShell virtual directory 'PowerShell-Proxy (Default Web Site)' has been changed to
 'D:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\PowerShell-Proxy'. This can cause the Exchange Management
 Tools to fail to connect. The expected path is 'D:\Program Files\Microsoft\Exchange
 Server\V14\ClientAccess\PowerShell'.

 WARNING: Storage driver file 'c:\windows\system32\drivers\vhdmp.sys' for 'Microsoft VHD HBA' on server
 TGCS025.our.network.tgcsnet.com is more than two years old. Check with your vendor to find out if a newer version is
 available. Installed driver details: 6.1.7601.17514 - 20101120222400.162444-300

 WARNING: Storage driver file 'c:\windows\system32\drivers\megasas.sys' for 'DELL PERC 6/i Integrated RAID Controller'
 on server TGCS025.our.network.tgcsnet.com is more than two years old. Check with your vendor to find out if a newer
 version is available. Installed driver details: 4.5.1.64 - 20090713214804.521663-240

 WARNING: More than one network interface on server TGCS025.our.network.tgcsnet.com has a default IP gateway listed.
 Communication errors may occur if these network connections link to independent subnets.

 WARNING: Network interface driver file 'c:\windows\system32\drivers\bxnd60a.sys' for 'l2nd' on server
 TGCS025.our.network.tgcsnet.com is more than two years old. Check with your vendor to find out if a newer version is
 available. Installed driver details: 4.8.4.0 - 20090610163426.409397-240

WARNING: The TEMP path on server TGCS025.our.network.tgcsnet.com is located on the same drive as the system partition.
 This may cause performance problems. Current TEMP path: %SystemRoot%\TEMP.

 WARNING: The TMP path on server TGCS025.our.network.tgcsnet.com is located on the same drive as the system partition.
 This may cause performance problems. Current TMP path: %SystemRoot%\TEMP.

 WARNING: Active Directory server tgcs012.our.network.tgcsnet.com is down or unreachable. This error could also be the
 result of a network or permissions problem. Error: Access denied

 WARNING: Active Directory server tgcs012.our.network.tgcsnet.com is down or unreachable. This error could also be the
 result of a network or permissions problem. Error: Access denied

 VERBOSE: [23:19:15.062 GMT] Test-SystemHealth : Admin Audit Log: Entered Handler:OnComplete.
 VERBOSE: [23:19:15.064 GMT] Test-SystemHealth : Ending processing &
 [PS] C:\Windows\system32>

Thoughts
0
Will SzymkowskiSenior Solution ArchitectCommented:
Based on that log you have several issues that you need to sort out. More then this question would ask for.

The following errors i see in this log are below...
WARNING: More than one network interface on server TGCS025.our.network.tgcsnet.com has a default IP gateway

WARNING: Active Directory server tgcs012.our.network.tgcsnet.com is down or unreachable. This error could also be the
 result of a network or permissions problem. Error: Access denied

WARNING: The path for the PowerShell virtual directory 'PowerShell-Proxy (Default Web Site)' has been changed to
 'D:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\PowerShell-Proxy'. This can cause the Exchange Management
 Tools to fail to connect. The expected path is 'D:\Program Files\Microsoft\Exchange
 Server\V14\ClientAccess\PowerShell'.

WARNING: Storage driver file 'c:\windows\system32\drivers\vhdmp.sys' for 'Microsoft VHD HBA' on server
 TGCS025.our.network.tgcsnet.com is more than two years old. Check with your vendor to find out if a newer version is

I would start correcting these issues before you try and to figure out what is going on with this cmdlet. All of the above issues could definitely contribute to the issue of not being able to access this cmdlet.

This is more of a systemic issue with your environment which is why your cmdlets are not working as expected. I would close this question cleanup and of the error messages you see above (starting with the DC not being accessible) then try using the cmdlet again.

Will.
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
Thomas GrassiSystems AdministratorAuthor Commented:
Will

WARNING: More than one network interface on server TGCS025.our.network.tgcsnet.com has a default IP gateway

This one we can ignore both my nics have the same default gateway and are on the same subnet.

No problem there I can think of

The others will research
0
Will SzymkowskiSenior Solution ArchitectCommented:
This one we can ignore both my nics have the same default gateway and are on the same subnet.

That is false. If you have multiple adapters that have IP's assigned you can only have 1 hard coded default gateway on 1 of them. the servers are not routers so having multiple gateways they will get confused for sending traffic. If you require multiple IP's on different NIC's then you need to have a default gateway on one of them and use static routes on the other. You do this using the Route command.

So this is definitely an issue as well.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Maybe I am wrong here

My first nic is used for port 25
The second nic is used for port 1025

Am I doing this incorrectly?

I have remote scripts that run and send emails via command line programs and the ISP blocks port 25 on the internet connection

So On the second nic I pointed it to port 1025 and now it all works.

What would be a better solution on this?
0
Will SzymkowskiSenior Solution ArchitectCommented:
That is fine but you should not have 2 gateways on 2 different NIC's on the same server. If you have 2 NIC's with different IP's then you need to have static routes to the NIC without the default Gatway.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

This my current setup
10.2.8.36  SN 255.255.252.0  GW 10.2.8.1 Port 25
10.2.8.37  SN 255.255.252.0  GW 10.2.8.1 Port 1025

Purposed
10.2.8.36  SN 255.255.252.0  GW 10.2.8.1 Port 25
10.2.9.37  SN 255.255.252.0  GW 10.2.9.1 Port 1025

I need to modify my router port forwarding also. that's not a problem

My subnet is setup to use this range that's why I started to 10.2.8.x  

Thoughts
0
Will SzymkowskiSenior Solution ArchitectCommented:
As stated in my previous comments, please accept and close this question and re-open new questions regarding your issues. For the purpose of PAQ and your initial question lets keep this specific to your original question.

That being said you have other underlying issues in your network based on the logs and these need to be addressed first before continuing.

I would be more then willing to assist with other questions you have. Also you can follow me and if there is ever a question that you would like assistance with send me a message.

Will.
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

I will make the changes in my last post and see what happens.

Will post if I have a question on that

Once I get the systemhealth corrections made will see what happens.

Thanks for all your help
0
Thomas GrassiSystems AdministratorAuthor Commented:
Will

Update

The following errors i see in this log are below...

WARNING: More than one network interface on server TGCS025.our.network.tgcsnet.com has a default IP gateway

working on this need new switch that will allow vlans


 WARNING: Active Directory server tgcs012.our.network.tgcsnet.com is down or unreachable. This error could also be the
  result of a network or permissions problem. Error: Access denied

This was becasue I forgot to run this first
$c=get-credential   which prompts for valid user name and password

Any way to automate this command?  Would like to run this test-systemhealth via script


WARNING: The path for the PowerShell virtual directory 'PowerShell-Proxy (Default Web Site)' has been changed to
  'D:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\PowerShell-Proxy'. This can cause the Exchange Management
  Tools to fail to connect. The expected path is 'D:\Program Files\Microsoft\Exchange
  Server\V14\ClientAccess\PowerShell'.

this is fixed



WARNING: Storage driver file 'c:\windows\system32\drivers\vhdmp.sys' for 'Microsoft VHD HBA' on server
  TGCS025.our.network.tgcsnet.com is more than two years old. Check with your vendor to find out if a newer version is

Not sure how to fix this one

Thoughts
0
Thomas GrassiSystems AdministratorAuthor Commented:
0
Will SzymkowskiSenior Solution ArchitectCommented:
Hey Trfrassijr55, it would be better if you just follow me on EE and then PM me when you have a question you want me to look at. Rather than posting in a closed question.

Will.
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Exchange

From novice to tech pro — start learning today.