SCCM 2007 deployment failure in DMZ

All,

I am having a problem deploying a script to servers in the DMZ.  Some servers work and some don't.  They are able to communicate to the site code just fine and ports appears to be open correctly.  The errors in the execmgr.log is below...  Any ideas?

IsNetResourceAccessible failed with error code 0x00000005
EnterRsRuningState failed to run script Restart1.1UnattendedForceRestart.bat 0x80008107      execmgr 3/2/2015 11:18:47 AM      12344 (0x3038)
LVL 1
mystikal1000Asked:
Who is Participating?
 
Nagendra Pratap SinghDesktop Applications SpecialistCommented:
These DMZ servers need to use the network access account because they may not be on the domain.

However, in this case all servers should fail. Still check if the Network access account is not locked etc.
0
 
mystikal1000Author Commented:
They are not part of any domain, how would it use the network account to begin with?
0
 
Nagendra Pratap SinghDesktop Applications SpecialistCommented:
It has to. Because it cannot use its machine account to authenticate.

Before downloading, authentication is needed so we have to Network Access Account

See it here

http://www.windows-noob.com/forums/uploads/monthly_07_2011/post-1-0-32969100-1310899490.png

http://gerryhampsoncm.blogspot.in/2013/02/sccm-2012-sp1-step-by-step-guide-part-4.html
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.