Cisco commands not working?

I have a current config and we got new telephone numbers for our incoming calls.

I want to change the voice translation-rule 1 and 3, and incoming called-number through dial peer... it wont accept "no" commands or a direct statement.

What could be preventing or am I using the wrong commands?
sfjmercadoAsked:
Who is Participating?
 
José MéndezCommented:
conf t
voice translation-rule 1
no rule 1

Is that sequence giving you an error? What error? Can you post a screenshot of the screen after you replicate the failure?

Even this one should work:

no voice translation-rule 1
0
 
sfjmercadoAuthor Commented:
config t mode of course.
0
 
sfjmercadoAuthor Commented:
Current configuration : 12543 bytes
!
! Last configuration change at 22:18:26 EDT Wed Aug 21 2013
! NVRAM config last updated at 22:24:03 EDT Wed Aug 21 2013
! NVRAM config last updated at 22:24:03 EDT Wed Aug 21 2013
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
!
boot-start-marker
boot system flash c3825-adventerprisek9_ivs-mz.151-4.M6.bin
boot-end-marker
!
!
!
no aaa new-model
!
clock timezone EST -5 0
 --More--         clock summer-time EDT recurring
!
dot11 syslog
ip source-route
!
ip cef
!
!
ip dhcp smart-relay
!
!
ip domain name
ip name-server 10.0.0.2
ip name-server 10.0.0.4
no ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
voice-card 0
!
 --More--         !
!
voice service voip
 ip address trusted list
  ipv4 0.0.0.0 0.0.0.0
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
 allow-connections sip to sip
 supplementary-service h450.12
 no supplementary-service sip moved-temporarily
 no supplementary-service sip refer
 sip
  bind control source-interface GigabitEthernet0/1.16
  registrar server expires max 250 min 200
  no call service stop
!
!
!
!
voice translation-rule 1
 rule 1 /7347947685/ /1000/
 rule 2 /8665787264/ /1000/
!
 --More--         voice translation-rule 2
 rule 1 /^9\(.*\)/ /\1/
!
voice translation-rule 3
 rule 1 // /7347947685/
!
!
voice translation-profile IN_TO_1000
 translate called 1
!
voice translation-profile SIP_OUTBOUND
 translate calling 3
 translate called 2
!
!
crypto pki token default removal timeout 0
!
crypto pki trustpoint TP-self-signed-4021075919
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-4021075919
 revocation-check none
 rsakeypair TP-self-signed-4021075919
!
!
 

!
!
!
!
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip http path flash:/gui
!

!
!
!
dial-peer voice 6500 voip
 description **Exchange Unified Messaging**
 destination-pattern 6500
 session protocol sipv2
 session target ipv4:10.0.0.5:5065
 session transport tcp
 incoming called-number 6500
 dtmf-relay rtp-nte
 codec g711ulaw
 fax rate disable
 fax protocol pass-through g711ulaw
 no vad
!
dial-peer voice 1000 voip
 description **Exchange Auto Attendant**
 translation-profile incoming IN_TO_1000
 --More--          destination-pattern 1000
 session protocol sipv2
 session target ipv4:10.0.0.5:5065
 session transport tcp
 incoming called-number 7347947685
 dtmf-relay rtp-nte
 codec g711ulaw
 fax rate disable
 fax protocol pass-through g711ulaw
 no vad
!
dial-peer voice 2001 voip
 description **VoIP MS 911**
 destination-pattern 911
 session protocol sipv2
 session target sip-server
 session transport udp
 voice-class sip asserted-id ppi
 no voice-class sip block 180
 no voice-class sip block 183
 no voice-class sip block 181
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 --More--          dtmf-relay rtp-nte
 codec g711ulaw
 no vad
!
dial-peer voice 2002 voip
 description **VoIP MS 411**
 destination-pattern 411
 session protocol sipv2
 session target sip-server
 session transport udp
 voice-class sip asserted-id ppi
 no voice-class sip block 180
 no voice-class sip block 183
 no voice-class sip block 181
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 dtmf-relay rtp-nte
 codec g711ulaw
 no vad
!
dial-peer voice 2004 voip
 description **VoIP MS NATIONAL**
 translation-profile outgoing SIP_OUTBOUND
 --More--          destination-pattern 91..........
 session protocol sipv2
 session target sip-server
 session transport udp
 voice-class sip asserted-id ppi
 no voice-class sip block 180
 no voice-class sip block 183
 no voice-class sip block 181
 voice-class sip pass-thru headers unsupp
 voice-class sip pass-thru content unsupp
 voice-class sip pass-thru content sdp
 dtmf-relay rtp-nte
 codec g711ulaw
 no vad
!
dial-peer voice 1001 voip
 description **TOLL FREE**
 translation-profile incoming IN_TO_1000
 destination-pattern 1000
 session protocol sipv2
 session target ipv4:10.0.0.5:5065
 session transport tcp
 incoming called-number 8665787264
 dtmf-relay rtp-nte
 --More--          codec g711ulaw
 fax rate disable
 fax protocol pass-through g711ulaw
 no vad
!
!
sip-ua
 credentials username  password 7  realm chicago.voip.ms
 authentication username  password 7  realm chicago.voip.ms
 no remote-party-id
 retry invite 3
 retry register 3
 timers register 100
 mwi-server ipv4:10.0.0.5 expires 3600 port 5065 transport tcp unsolicited
 registrar dns:chicago.voip.ms expires 200
 sip-server dns:chicago.voip.ms
 host-registrar
!
!
!
gatekeeper
 shutdown
 --More--         !
!
telephony-service
 max-ephones 185
 max-dn 500
 ip source-address 10.0.16.1 port 2000
 cnf-file location flash:
 load 7960-7940 P00308010200.loads
 keepalive 10
 voicemail 6500
 max-conferences 12 gain -6
 moh flash:music-on-hold.au
 dn-webedit
 time-webedit
 transfer-system full-consult
 secondary-dialtone 9
 directory last-name-first
 create cnf-files version-stamp 7960 Mar 21 2013 23:28:33
!
!
ephone-dn  1  dual-line
 number 1001 no-reg primary
 description 1001
 name LTG Sir Frederick Mercado
 call-forward busy 6500
 call-forward noan 6500 timeout 18
 hold-alert 30 originator
!
!
ephone-dn  2  dual-line
 number 1003 no-reg primary
 label Reception
 name Reception
!
!
ephone  1
 device-security-mode none
 mac-address 0014.69E0.5F8A
 type 7940
 button  1:1
!
!
!
ephone  2
 device-security-mode none
 --More--          description Reception
 mac-address 0025.22AF.FAF4
 type CIPC
 button  1:2
!
!
!


USRMIHQ#
0
 
sfjmercadoAuthor Commented:
I am not getting an error, I assume its a logging command I need to implement. What do I need to do?
0
 
sfjmercadoAuthor Commented:
nvm! I was looking at sh config instead of sh run! My bad! Thanks...I just have to deal with a SIP issue with VM light not coming up for exchange 2013 users. It seems that it cannot relay a signal to turn light on/off.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.