TrustGroup-UAE
asked on
SIP Trunk on Cisco Call Manager Express
Hi All,
Hope everyone is well?
I am trying to congiure a SIP Trunk on a Call Manager Express System but not having much luck.
If i do a Show SIP Register i can see the Trunk is up.
I cannot however make any incoming or out going calls.
When calling in it Rings once then drops. When Ringing out its silent for about 10 seconds then drops.
I have attached some debug (Debug CCSIP All) for a Incoming and Outgoing call. Could one of you kind people have a look for me and see if you can see any problems.
I have also attached a copy of My Config.
Cheers
TME
Config.log
Incoming-Call-Log.txt
Outgoing-Call-log.txt
Hope everyone is well?
I am trying to congiure a SIP Trunk on a Call Manager Express System but not having much luck.
If i do a Show SIP Register i can see the Trunk is up.
I cannot however make any incoming or out going calls.
When calling in it Rings once then drops. When Ringing out its silent for about 10 seconds then drops.
I have attached some debug (Debug CCSIP All) for a Incoming and Outgoing call. Could one of you kind people have a look for me and see if you can see any problems.
I have also attached a copy of My Config.
Cheers
TME
Config.log
Incoming-Call-Log.txt
Outgoing-Call-log.txt
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER