vc++ 6.0 Gui not loading

Hi,

I want to see the GUI part of the project  in debugging mode
but is shows error Gui not loading

Loaded 'C:\WINDOWS\system32\oledlg.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\ole32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\olepro32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\oleaut32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\wsock32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\odbc32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.6028_x-ww_61e65202\comctl32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\odbcint.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\uxtheme.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\mswsock.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\dnsapi.dll', no matching symbolic information found.
The thread 0xE38 has exited with code 1 (0x1).
Loaded 'C:\WINDOWS\system32\crypt32.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\msasn1.dll', no matching symbolic information found.
Loaded 'C:\WINDOWS\system32\urlmon.dll', no matching symbolic information found.

Open in new window


plz find the attachment what i need to do ?
error6.JPG
prashanth agsoftware engineer Asked:
Who is Participating?
 
sarabandeCommented:
In that case you must use the source code those intermediate files were compiled with.

the output windows shows that the pcs.exe has executed but exited with 0 what normally means success. that means there was at least a previous version of the pcs.exe available and it should be possible to find out why this previous version didn't show up even if the most recent build has failed.

prashant, you may check with the windows explorer whether the pcs.exe which is in the debug folder below your project folder is  old or has a current timestamp. note, the project folder is the directory where the pcs.dsw and pcs.dsp files are located. if it is old, it is as Andy has said, there is no way out beside of a successful build or rebuild which would lead to an up-to-date pcs.exe.

in visual studio you should do f7 and build the workspace. if you get build errors please post the errors here.

note, the screenshot you posted doesn't contain errors. it only shows runtime information from loading dependent system dll's. the issue you encounter is that the epcs.cpp didn't compile (at least there is not a current epcs.obj  file) what can have different reasons. the most likely one is that there are compile errors not resolved. but there are also other reasons possible, for example that you removed epcs.cpp from build or have renamed it to pcs.cpp, ....

client don't want rebuild  
you should not give a debug version of your program to a client. and the client shouldn't start the program from visual studio. instead you should build a release version of your program and copy the pcs.exe of the release subfolder to the client's computer. vc6.0 is 17 years old. because of that any modern computer should have any of the dll's your program needs and a separate "setup" is most likely not needed.

suggest me some good online   VC++  6.0 tuorials
you may try scribble tutorial from https://msdn.microsoft.com/en-us/library/aa716527(v=vs.60).aspx

Sara
0
 
AndyAinscowFreelance programmer / ConsultantCommented:
Have you clicked 'Yes' to rebuild the project?
0
 
prashanth agsoftware engineer Author Commented:
no
0
Free Tool: IP Lookup

Get more info about an IP address or domain name, such as organization, abuse contacts and geolocation.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

 
AndyAinscowFreelance programmer / ConsultantCommented:
Well do so - the message tells you some files are not there or of an older version.  Just clicking yes might cure your problem.
0
 
prashanth agsoftware engineer Author Commented:
I've requested that this question be deleted for the following reason:

question was simple and i need ask new one
0
 
AndyAinscowFreelance programmer / ConsultantCommented:
>>question was simple and i need ask new one
What does that mean (most questions are simple when you know the answer)?
Does that mean my suggestion worked?  If it didn't work what error messages do you get?
0
 
prashanth agsoftware engineer Author Commented:
client don't want rebuild  and i have ask  same question again
0
 
AndyAinscowFreelance programmer / ConsultantCommented:
Oh dear.
As you see from the message at least one of the following is true:
One or more files necessary to run you app do not exist.  (This says absolutely nothing about the source code).
The files required to run your app exist but the source code is not the same as that those files were based on.
So, to run the debug build from the VS editor you MUST rebuild that code OR use the code the existing files were based upon.
>>client don't want rebuild
You talk about running in debugging mode - so why should this affect your client?  A client would typically be given a release build (you should know why as a developer).  

If your compiled files don't exist then you will need to get them somehow.  You could try to attach the VC editor to a running process such as your app, but how useful that will be to you I don't know.

>>and i have ask  same question again
Just expect the same or very similar answer.
0
 
sarabandeCommented:
if you right-click at the ouput window in visual studio you can supress unwanted messages like the ones you posted.

for example i normally set the filter such that any load or unload message will be suppressed since those messages are totally useless for nearly all visual studio projects. the messages give the 'information' that the runtime dll's loaded for the debug version of visual studio were provided without a debug database that would allow debugging of those dll's. although this sounds as if there is an issue it actually would make no sense for almost all 'normal' visual studio projects to debug into runtime code since this code is well-tested and rarely responsible for any of your coding issues. moreover, if you install the suitable sdk to ur visual studio version you could add the missing 'symbolic information' to the dll's. however, i would guess that you don't get any benefit by this or even add issues to your system since there are more ways to making your system corrupt than to making it complete.

Sara
0
 
prashanth agsoftware engineer Author Commented:
Dear All,

Actually i'm looking for is there any alternative solution without rebuild and i am a   vc++ beginner
plzz suggest me some good online   VC++  6.0 tuorials
0
 
AndyAinscowFreelance programmer / ConsultantCommented:
>> is there any alternative solution without rebuild

I have already told you how to do that.
If all of the necessary intermediate files exist then VC6 is telling you at least one file in the source code is newer than those compiled files.  In that case you must use the source code those intermediate files were compiled with.

However should either intermediate files be missing or the source code not available then what you want is not possible.

I don't know of any way to make myself clearer.  You might not like it but no amount of tutorials will make any difference to a no, it is not possible.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.