<div>
Yes. I did use that command. I was thinking a command like show interface ge-0/0/0 detail where you can see the property for the port. Thanks
</div>


Yes. I did use that command. I was thinking a command like show interface ge-0/0/0 detail where you can see the property for the port. Thanks

<div>
<div class="content wysiwyg-content">
From my understanding, dhcp-trusted is enable on trunk ports and disable on access ports. Is there a command to verify that? Thanks
</div>
</div>


From my understanding, dhcp-trusted is enable on trunk ports and disable on access ports. Is there a command to verify that? Thanks

juniper ex4200 dhcp-trusted

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.

Switches / Hubs

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.

Networking

The Dynamic Host Configuration Protocol (DHCP) is an auto configuration protocol used on IP networks and an extension of the Bootstrap Protocol. DHCP allows for computers to be configured automatically to communicate with each other over an IP network without the need for manual setup by a network administrator. The implementation of DHCP relies on a DHCP server to hand out network configuration information to DHCP-capable clients that request an IP address (and other information required or useful in communicating with other devices on an IP network). In addition to an IP address, common configuration information served over DHCP includes a default gateway, subnet mask and DNS sever(s).