asked on

cisco 1941 with security and data license

We would like to order a cisco ISR G2 router cisco 1941-sec which has routing capabilities, how should we specify the inclusion of DATA license along w/ sec license?
I believe the data license is L-SL-DATA-19=.

Thanks;

Matt V

I think you need to order CISCO1941-SEC/K9 and then also the SL-19-DATA-K9.

Check with your Cisco vendor to be absolutely sure though.

totaram

ASKER

Does Cisco 1941-SEC/K9 not come inbuilt w/ DATA license? If so, We may just need to activate it?

Matt V

It's hard to tell from the literature, that is why I suggest talking to your reseller as they will know for sure.

totaram

ASKER

Can you tell me the steps needed to activate the data license on the router?

Matt V

http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html

You need to activate the licence in the online portal, then apply the licence key they provide to you.

Also, from the diagram on this page you can see what is included in the DATA, SEC and BASE licence.

http://www.cisco.com/c/en/us/products/collateral/ios-nx-os-software/ios-packaging/product_bulletin_c25-566278.html

Daniel Sheppard

What do you actually need the DATA license for?

totaram

ASKER

for routing protocol configuration

Matt V

The routing protocols are in the IPBase licence.

You just need the base router + security.

Daniel Sheppard

The only thinga that require data are mpls or advanced VPN functionality.

totaram

ASKER

If that is the case, what extra does the data license bring?

ASKER CERTIFIED SOLUTION

Matt V

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

SOLUTION

Daniel Sheppard

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

totaram

ASKER

We are looking to use it as for both MPLS and IP SLA.

totaram

ASKER

Thanks