<div>
That worked. <br />
<br />
Thank you
</div>


<div>
<div class="content wysiwyg-content">
I have a NEXSAN satabeast setup with two RAID 5 arrays. I am able to map a share on the first array using ISCSI initiator. I am looking to setup a second share on the second array. Am I able to do this using the same connection on the ISCSI initiator or must there only be one connection per ISCSI session. Any assistance would be appreciated.
</div>
</div>


I have a NEXSAN satabeast setup with two RAID 5 arrays. I am able to map a share on the first array using ISCSI initiator. I am looking to setup a second share on the second array. Am I able to do this using the same connection on the ISCSI initiator or must there only be one connection per ISCSI session. Any assistance would be appreciated.

Setting up share on RAID 5 Array.

Networking is the process of connecting computing devices, peripherals and terminals together through a system that uses wiring, cabling or radio waves that enable their users to communicate, share information and interact over distances. Often associated are issues regarding operating systems, hardware and equipment, cloud and virtual networking, protocols, architecture, storage and management.

Networking

RAID stands for Redundant Array of Independent Disks.

RAID is data storage technology that allows multiple drives to be used together as a single virtual drive for reasons such as fault tolerance, reliability and performance. 

There are several different levels of RAID that determine how the data is stored and the level of redundancy achieved across the drives.