asked on
How to communicate multiple RS485 over TCP/IP network.
I have multiple serial devices RS232/422/485 and wanted to control all devices interconnected over TCP/IP network and controlled by one PC.
I read through Serial port complete and only have basic idea about hardware and in past i programmed to control one serial device.
Request you to provide best hardware/software suited for this situation.
IMG-diag-dn-commercial-big.jpg
I read through Serial port complete and only have basic idea about hardware and in past i programmed to control one serial device.
Request you to provide best hardware/software suited for this situation.
IMG-diag-dn-commercial-big.jpg
Network ArchitectureWireless HardwareEmbedded Hardware
Last Comment
Davis McCarn
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
Thanks Davis for you reply i would like to hear more from you on exactly how we can design this... We got multiple serial devices to be controlled over TCP/IP network here if i say controlled which means realtime read/write to simultaneous serial devices.
Your question is lacking far too many details to give any definitive answer. I would suggest you ask the manufacturer for specific answers after reading the user's manual: http://gridconnect.com/media/documentation/grid_connect/NET485_UM_800240_c.pdf