davidthegnome2003
asked on
HP ProLiant DL380 OS Install
When choosing the media to install Windows 2008 sp2 x64 in Intelligent Provisioning, DVDs cannot be accessed. USB flash drives are found and read, but cannot be booted to or an ISO loaded from them to install the OS.
The USB has been formatted with NTFS, then Fat32. A new DVD has been burned from Microsoft's download of Server 2008.
The Hard Drives are set up as a RAID 5 for the OS and a separate RAID 5 for data.
Intelligent Provisioning 2.01.29
The USB has been formatted with NTFS, then Fat32. A new DVD has been burned from Microsoft's download of Server 2008.
The Hard Drives are set up as a RAID 5 for the OS and a separate RAID 5 for data.
Intelligent Provisioning 2.01.29
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I have not ran the install over the network, only through USB and DVD.
I was not using that download from HP, I will check it out.
I was not using that download from HP, I will check it out.
Your server is Gen8 or Gen9?
ASKER
After my boss finally decided to try this (3 days later..foolish pride) it worked great.
Have you tried using a network share for the ISO?