rwallacej
asked on
RJ-485 RJ-232 to wireless or PC without cable
Is there way I can read data at set frequency e.g. 868.25 or 915MHz without 3rd party device (using just PC?)
Background:
I want to "talk" with the inverters in my loft used by solar panels, without 3rd party device.
I have a Aurora Photovolatic Inverter which have a device PVI RadioModule attached. This is transmitting data at 868.25MHz or 915MHz. It is connected to a RJ-232 RJ-485 in inverter box.
I have 3rd party device PVI-DESKTOP-IT that can currently task with PVI RadioModule. I would like to talk to PVI RadioModule direct from PC though. The device is a bit clunky. Because inverter is in loft I can't directly cable to the RJ-323 RJ-435
http://ressupply.com/documents/abb/PVI_Desktop_Installation_Manual.pdf
Background:
I want to "talk" with the inverters in my loft used by solar panels, without 3rd party device.
I have a Aurora Photovolatic Inverter which have a device PVI RadioModule attached. This is transmitting data at 868.25MHz or 915MHz. It is connected to a RJ-232 RJ-485 in inverter box.
I have 3rd party device PVI-DESKTOP-IT that can currently task with PVI RadioModule. I would like to talk to PVI RadioModule direct from PC though. The device is a bit clunky. Because inverter is in loft I can't directly cable to the RJ-323 RJ-435
http://ressupply.com/documents/abb/PVI_Desktop_Installation_Manual.pdf
No, the rs4850 and the items are proprietary.and would use awareness to receive the data and using a USB you can connect to the TS 4850.
ASKER
RJ-485 not 4850
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.