%IP-3-LOOPPAK: Looping packet detected and dropped error

012549: May 11 2015 09:06:12: %IP-3-LOOPPAK: Looping packet detected and dropped -
src=10.199.67.14, dst=10.255.255.255, hl=20, tl=229, prot=17, sport=138, dport=138
in=Vlan470, nexthop=10.199.0.2, out=Vlan470
options=none -Process= "IP Input", ipl= 0, pid= 330
-Traceback= 42733994z 42733C90z 42735284z 427356D0z 42735D98z 4272339Cz 42723BB8z 42723DA0z 42723E7Cz 427241ECz 43566144z 43566130z
012550: May 11 2015 09:27:09: %IP-3-LOOPPAK: Looping packet detected and dropped -
src=10.199.67.142, dst=10.255.255.255, hl=20, tl=229, prot=17, sport=138, dport=138
in=Vlan470, nexthop=10.199.0.2, out=Vlan470
options=none -Process= "IP Input", ipl= 0, pid= 330
-Traceback= 42733994z 42733C90z 42735284z 427356D0z 42735D98z 4272339Cz 42723BB8z 42723DA0z 42723E7Cz 427241ECz 43566144z 43566130z
012551: May 11 2015 09:39:09: %IP-3-LOOPPAK: Looping packet detected and dropped -
src=10.199.67.142, dst=10.255.255.255, hl=20, tl=229, prot=17, sport=138, dport=138
in=Vlan470, nexthop=10.199.0.2, out=Vlan470
options=none -Process= "IP Input", ipl= 0, pid= 330
-Traceback= 42733994z 42733C90z 42735284z 427356D0z 42735D98z 4272339Cz 42723BB8z 42723DA0z 42723E7Cz 427241ECz 43566144z 43566130z
012552: May 11 2015 09:46:08: %IP-3-LOOPPAK: Looping packet detected and dropped -
src=10.199.67.14, dst=10.255.255.255, hl=20, tl=78, prot=17, sport=137, dport=137
in=Vlan470, nexthop=10.199.0.2, out=Vlan470
options=none -Process= "IP Input", ipl= 0, pid= 330
-Traceback= 42733994z 42733C90z 42735284z 427356D0z 42735D98z 4272339Cz 42723BB8z 42723DA0z 42723E7Cz 427241ECz 43566144z 43566130z
EvolutionzzAsked:
Who is Participating?
 
JustInCaseCommented:
Is maybe IP helper-address is the same as SVI address???

Something like:

interface Vlan 470
ip address 10.199.0.2 x.x.x.x
ip helper-address 10.199.0.2
1
 
EvolutionzzAuthor Commented:
There is NO ip helper address on the VLAN.  The VLAN is just a point to point.  See the config for the two devices below:


Device #1
wc01082_cat6509a#sho run int vlan 470
!
interface Vlan470
 description 200 peer to peer 002
 mtu 9216
 ip address 10.199.0.2 255.255.255.252
 no ip redirects
 ip flow ingress
 ip flow egress
 ipv6 address FDC8:8701:200:470::1/64
 ipv6 enable
 ipv6 rip b082noc enable
end

Device #2
x7y3_cat6509a#sho run int vlan 470
!
interface Vlan470
 description 200-082
 mtu 9216
 ip address 10.199.0.1 255.255.255.252
 no ip redirects
 ip flow ingress
 ipv6 address FDC8:8701:200:470::2/64
 ipv6 enable
 ipv6 rip b082noc enable
end
0
 
JustInCaseCommented:
Message is from Device #1 or Device #2?
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.