I am building a test lab
I have a cisco pix 501 and an asa 5505
I have my pix "outside" connected to the asa "inside"
I have my pix set up for 192.168.10.0 255.255.255.0
i have my computers plugged into the pix "inside"
Everything on the 10.0 can talk to the asa which is ont he 0.0 network.
However, I cannot talk from the 0.0 network to the 10.0 network. I belive it has something to do with the "outside" interface. What am i missing in order to allow all traffic from 192.168.0.0 255.255.255.0 network to come into the pix?