Cisco 2801 Router Issue

Turning on my Cisco router this is what is coming up over and over and over:

Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
loadprog: error - on file open
boot: cannot load "flash:c2800nm-advsecurityk9-mz.150-1.M7.bin"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled

It sounds like the fan is continuously running, very loudly, also.  

Is this router DOA?
aclaus225Asked:
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Daniel SheppardSenior Network Analyst - Core & PerimeterCommented:
Have you tries a tftp boot?  Can you see the flash?  The file in flash?

You are in rommon, there should be a small set of commands for troubleshooting.

If you can tftp boot, chances are good it is a issue with your cf card
aclaus225Author Commented:
þ

System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.

Initializing memory for ECC
.
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
loadprog: error - on file open
boot: cannot load "flash:c2800nm-advsecurityk9-mz.150-1.M7.bin"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled


Readonly ROMMON initialized
PASSWORD RECOVERY FUNCTIONALITY IS DISABLED
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
c2811 processor with 262144 Kbytes of main memory
Main memory is configured to 64 bit mode with ECC enabled

Open in new window

aclaus225Author Commented:
It is not actually booting to a prompt, just keeps cycling through what is above.
ImybashCommented:
Remove and reseat the memory of that does not work, flash the router:

http://www.cisco.com/c/en/us/td/docs/routers/access/2800/hardware/installation/guide/hw.pdf

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.