provide access to static pool address to internet access directly

sir i have attached the configuration of my router. in this i have on dhcp pool and one 192.168.9.0 series for users. But we have a static pool i.e. 115.249.110.66 to 115.249.110.96. i want to allow these ips to access directly without routing. so that these pc can accessible directly from internet. How can do this please help me
router2811.txt
ManojtanwarAsked:
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

JustInCaseCommented:
ip nat source inside static 192.168.9.4 115.249.110.67

It is two way link.
From host to internet and vice versa.
When packets for destination 115.249.110.67 comes on WAN it will be forwarded directly to 192.168.9.4.
ManojtanwarAuthor Commented:
sir

my isp provider came and put these command in router

ip nat pool ovrld 115.249.19.29 115.249.19.29 netmask 255.255.255.252
ip nat inside source list 1 pool ovrld overload
ip nat inside source list 2 interface FastEthernet0/0 overload
!
access-list 1 permit 192.168.9.0 0.0.0.255
access-list 2 permit 192.168.48.0 0.0.3.255
access-list 100 permit tcp 192.168.48.0 0.0.3.255 host 208.67.222.222 eq domain
access-list 100 permit udp 192.168.48.0 0.0.3.255 host 208.67.222.222 eq domain
access-list 100 permit tcp 192.168.48.0 0.0.3.255 host 208.67.222.220 eq domain
access-list 100 permit udp 192.168.48.0 0.0.3.255 host 208.67.222.220 eq domain
access-list 100 deny   tcp 192.168.48.0 0.0.3.255 any eq domain
access-list 100 deny   udp 192.168.48.0 0.0.3.255 any eq domain
access-list 100 permit ip 192.168.48.0 0.0.3.255 any
access-list 100 permit udp any host 255.255.255.255 eq bootps
access-list 100 permit udp any host 255.255.255.255 eq bootpc
access-list 100 permit ip 192.168.9.0 0.0.0.255 any
access-list 100 permit ip 115.249.110.64 0.0.0.31 any

i want to know what is the difference below three  commands pls explain
ip nat pool ovrld 115.249.19.29 115.249.19.29 netmask 255.255.255.252
ip nat inside source list 1 pool ovrld overload
ip nat inside source list 2 interface FastEthernet0/0 overload
JustInCaseCommented:
ip nat pool ovrld 115.249.19.29 115.249.19.29 netmask 255.255.255.252
Defines a NAT pool named ovrld with a range of a single IP address - 115.249.19.29
ip nat inside source list 1 pool ovrld overload
Defines that hosts allowed in list 1 (in this case 192.168.9.0/24) use pool ovrld for natting (overload) - again single IP address 115.249.19.29
ip nat inside source list 2 interface FastEthernet0/0 overload
Defines that hosts allowed in list 2 (in this case 192.168.48.0/24) use interface Fa0/0 for natting (overload)

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
ManojtanwarAuthor Commented:
What is difference between last two command
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Routers

From novice to tech pro — start learning today.