MASWORLD
asked on
Mikrotik Routerboard RB750 how merge 4 Line
I Have Mikrotik Routerboard RB750 and i need to merge 4 line with this scenario
all line with 8 Mbps for each one total should be after succesfully merge 32 Mbps
line 1 in ether1 router 192.168.1.1
line 2 in ether2 router 192.168.2.1
line 3 in ether3 router 192.168.3.1
line 4 in ether4 router 192.168.4.1
out LAN in ether 5 10.0.0.1
i need a terminal script to merge this 4 line with above scenario
Thanks
all line with 8 Mbps for each one total should be after succesfully merge 32 Mbps
line 1 in ether1 router 192.168.1.1
line 2 in ether2 router 192.168.2.1
line 3 in ether3 router 192.168.3.1
line 4 in ether4 router 192.168.4.1
out LAN in ether 5 10.0.0.1
i need a terminal script to merge this 4 line with above scenario
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
thanks Fouad Maidine
i change the script in the web and apply to my router but not work
First of all make sure your router is upgraded
Then you can DO Load balancing there is a script in Wikipedia for merging lines
http://wiki.mikrotik.com/wiki/Manual:PCC#Application_Example_-_Load_Balancing
i change the script in the web and apply to my router but not work
ASKER
thanks termody
i also apply your script it`s look like work but the result is not as expected did not get the 32 mbps
i also apply your script it`s look like work but the result is not as expected did not get the 32 mbps
Dear Mas world In order to get the full 32 mbps It depends on many things
First are you sure that every router is connect to the right Ethernet as you mention in your question
second did you test every router standalone to make sure you got full 8 mbps
third if your download around 25 to 30 that's will be mean the merged successfully
First are you sure that every router is connect to the right Ethernet as you mention in your question
second did you test every router standalone to make sure you got full 8 mbps
third if your download around 25 to 30 that's will be mean the merged successfully
ASKER
Thank termody i got it finally
sorry the Order of the Ethernet was wrong
i can now download with 3.82 MBps :) by IDMAn my line now 30.56 mbps awesome
sorry the Order of the Ethernet was wrong
i can now download with 3.82 MBps :) by IDMAn my line now 30.56 mbps awesome
Excellent you are welcome
ASKER
if any of this line down merge still work or what
Yes don`t worry
Then you can DO Load balancing there is a script in Wikipedia for merging lines
http://wiki.mikrotik.com/wiki/Manual:PCC#Application_Example_-_Load_Balancing