Harold
asked on
ShoreTel, option 156 and Forigate 100D
I'm trying to get our VoIP phones to get the final configuration info from the the Shoretel server.
We have our data LAN(VLAN 1), pulling IPs from DHCP, 2003 Server, where I also configured the 156 option(attached).
VoIP phones(VLAN 8) are getting IPs from out FG100D.
VLANS 1 and 8 are allowed across trunks, except for vswitch that Shoretel is on. It is configured for VLAN 8.
The phones are getting IPs, DNS, SNTP settings, but just not connecting to Shoretel server, to config file.
I also tried applying the option 156 in the FG100D, but still no luck.
Also, I'm going to have to pass this config across VPNs too, if anyone has any input on this.
Anyone ever worked with this?
We have our data LAN(VLAN 1), pulling IPs from DHCP, 2003 Server, where I also configured the 156 option(attached).
VoIP phones(VLAN 8) are getting IPs from out FG100D.
VLANS 1 and 8 are allowed across trunks, except for vswitch that Shoretel is on. It is configured for VLAN 8.
The phones are getting IPs, DNS, SNTP settings, but just not connecting to Shoretel server, to config file.
I also tried applying the option 156 in the FG100D, but still no luck.
Also, I'm going to have to pass this config across VPNs too, if anyone has any input on this.
Anyone ever worked with this?
ASKER
Our voice and data are physically segmented. I've used the exact syntax for the 156 option and also modifed with no spacing per a suggestion. It is added to the 2003 Server DHCP and on the FG100D. I've also added the statement to each single DHCP server to see if that worked, but not.
The option is currently just on the 2003 server pointing to the Shoretel server.
ftpservers=10.33.8.1,count ry=1,langu age=1,laye r2tagging= 1,vlanid=8
The option is currently just on the 2003 server pointing to the Shoretel server.
ftpservers=10.33.8.1,count
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Yes, I let it get an IP from DHCP and put a static server IP in and it works fine. All IP assignment is correct, SNTP, just a static server IP.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
There's 802.1q under Network Policy and another under Ethernet. I enabled 802.1q under Network Policy, on the phone and added VLAN 8. It restarted, changes were applied and I had dial tone still.
Doesn't that last value specify the VLAN?
ftpservers=10.33.8.1,count ry=1,langu age=1,laye r2tagging= 1,vlanid=8
Doesn't that last value specify the VLAN?
ftpservers=10.33.8.1,count
ASKER
I ended up moving the DHCP pool to the servers DHCP and only used the ftpserver value.
option 156 ascii "ftpservers=<IPOFSHORETELS
Why are you using 2 separate DHCP servers? Do you have phones and computers plugged into the same switches and computers then plugged into phones? If so, eliminate the 2nd DHCP server and put option 156 on the windows box.