Gareth McKee
asked on
Cisco router - vlan member to have no access to each other
Hi,
I have a cisco RV180W wireless router.
I have 2 VLANs.
I would like the devices on the 2nd VLAN to have only access to the outside world, ie zero internal communication.
Currently the 2nd VLAN is available on 1 of the ports and 1 of the SSIDs.
How would I achieve this?
Thanks in advance
Gareth
I have a cisco RV180W wireless router.
I have 2 VLANs.
I would like the devices on the 2nd VLAN to have only access to the outside world, ie zero internal communication.
Currently the 2nd VLAN is available on 1 of the ports and 1 of the SSIDs.
How would I achieve this?
Thanks in advance
Gareth
ASKER
hi Craig,
thanks for the help.
I didn't explain myself correctly, I would like VLAN2 devices to only have access to the internet, I do not want them to have access to each other either. I have seen on other router a setting similar to this in a tick box but cannot find one on this router.
I hope that makes it a little more clear.
thanks
gareth
thanks for the help.
I didn't explain myself correctly, I would like VLAN2 devices to only have access to the internet, I do not want them to have access to each other either. I have seen on other router a setting similar to this in a tick box but cannot find one on this router.
I hope that makes it a little more clear.
thanks
gareth
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thanks, I will take a look.
You should be able to create an access rule which denies all traffic from 192.168.0.0 to 10.0.0.0. This doc will help...
http://sbkb.cisco.com/CiscoSB/GetArticle.aspx?docid=7ecb786a5ef646ff8821d3ca3e24aabd_Add_Access_rules_on_RV180_and_RV180W.xml&pid=2&converted=0