<div>
Compatibility mode did the trick. Would you have any idea why this is necessary?
</div>


Compatibility mode did the trick. Would you have any idea why this is necessary?

<div>
The Sg300 web interface might not be interpreted/rendered as intended on IE9/IE10/11 <br />
<br />
Nothing you can do about it. Do not believe the newer firmware deal with this issue.
</div>


The Sg300 web interface might not be interpreted/rendered as intended on IE9/IE10/11

Nothing you can do about it. Do not believe the newer firmware deal with this issue.

<div>
Thank you Arnold. I have attempted to load the 1.4.1.3 Firmware with no success. I will look into that one and post a new question if problem persists.
</div>


Thank you Arnold. I have attempted to load the 1.4.1.3 Firmware with no success. I will look into that one and post a new question if problem persists.

<div>
Just a note: Chrome results are the same :/
</div>


Just a note: Chrome results are the same :/

<div>
<div class="content wysiwyg-content">
I have a new Cisco SG300-24 managed switch. Each time I attempt to access the web interface I get an empty screen when I log on.<a href="https://filedb.experts-exchange.com/incoming/2015/06_w24/918543/Cisco-SG300-24.JPG" target="_blank" title="View of Web Interface after logon (60 KB)"><img alt="View of Web Interface after logon" class="file-block lazyload" style="max-width: 800px;" data-src="https://filedb.experts-exchange.com/incoming/2015/06_w24/800_918543/Cisco-SG300-24.JPG" /></a><br />
This one has me stumped. I have tried changing the screen settings and used different computers to access the web based interface. I can get access via a serial connection.<br />
HELP!
</div>
</div>


Cisco-SG300-24.JPG

I have a new Cisco SG300-24 managed switch. Each time I attempt to access the web interface I get an empty screen when I log on.

This one has me stumped. I have tried changing the screen settings and used different computers to access the web based interface. I can get access via a serial connection.
HELP!

CISCO Switch Question

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.