asked on FlashBuilder allocate more memory using FlashBuilder.ini
I tried to allocate more memory to adobe Flash builder then it gives error as shown below.
![FlashBuilderJVMTerminatedError.jpg]()
.
Attached modified FlashBuilder.ini and FlashBuilderC.ini - that failed
Originally working FlashBuilder_Working_06_17
FlashBuilder.ini
FlashBuilderC.ini
FlashBuilder-Working-06-17.ini
.Attached modified FlashBuilder.ini and FlashBuilderC.ini - that failed
Originally working FlashBuilder_Working_06_17
FlashBuilder.ini
FlashBuilderC.ini
FlashBuilder-Working-06-17.ini
Apache FlexJava EEAdobe Flash
Last Comment
Shankar Bhagat
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
It is 32bit java you are running. It defaults to -Xmx1600m, so removing memory parameters will run it in maximum RAM possible under architectural limitations.
ASKER
1) From which line you concluded that it is running on 32bit java. I have 64 bit java too by default set in environment settings with JAVA_HOME and path="C:\tools\Java\bin". How can I specify that path at startup to take that Java.
2) As suggested with below configuration. the flash builder does not open any number of times I click.
-vmargs
-Xms256m
-XX:PermSize=64m
-Djava.net.preferIPv4Stack
-Dorg.eclipse.equinox.p2.r
Please help
2) As suggested with below configuration. the flash builder does not open any number of times I click.
-vmargs
-Xms256m
-XX:PermSize=64m
-Djava.net.preferIPv4Stack
-Dorg.eclipse.equinox.p2.r
Please help
SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
So what should the FlashBuilder.ini look like.
-vmargs
-Djava.net.preferIPv4Stack
-Dorg.eclipse.equinox.p2.r
-Djava.net.preferIPv4Stack
-Dorg.eclipse.equinox.p2.r
ASKER
Flash Builder took 3-4 min to load after click.
It became very slow and does not respond for long times after each click.
right click project and wait for 2 min. click build property and wait for another 2 min...
It became very slow and does not respond for long times after each click.
right click project and wait for 2 min. click build property and wait for another 2 min...
Do you have memory in your computer? It defaults to ~1.6GB
ASKER
Yes. I have 16GB RAM on my machine and 500 GB Solid State Hard Disk out of which 238 GB is free.
Try -Xms1g -Xmx1g (i.e allocate all ram on the spot)
ASKER
My FlashBuilder.ini:-
-startup
plugins/org.eclipse.equino
--launcher.library
plugins/org.eclipse.equino
-nl
en_US
-vmargs
-Xms1g
-Xmx1g
-Djava.net.preferIPv4Stack
-Dorg.eclipse.equinox.p2.r
Screen shot shows the error.
![Flash Builder config error]()
-startup
plugins/org.eclipse.equino
--launcher.library
plugins/org.eclipse.equino
-nl
en_US
-vmargs
-Xms1g
-Xmx1g
-Djava.net.preferIPv4Stack
-Dorg.eclipse.equinox.p2.r
Screen shot shows the error.
SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
Please close
ASKER
Gheist had good knowledge. I tried different solution suggested by him but they did not work for me.
So I wish to put first solution as best solution
So I wish to put first solution as best solution
ASKER
I am stuck in closing the solution
The better Windows gets the slower old java versions become.
You could have given half of points to you ;)
You could have given half of points to you ;)
ASKER
Many system have different values but the one selected first is the best solution for my system