odewulf
asked on
How to configure multicast between VLANS on cisco switches 2960.
we have multiple VLANS and we are adding users to VLAN 55. our main VLAN being VLAN 95.
all the printers are on VLAN 95, when I connect to VLAN 55, the client doesnt see the printers anymore. I can ping them but no more bonjour.
If I had a printer to vlan 55 then I can see it and print to it.
here is what I did so far but still not working:
this is done on our cisco router
I set up ip pim dense-mode on the 2 VLAN interface
ip multicast-routing
on the switches, I enabled snooping
ip igmp snooping.
is this even feasible? if so could someone direct me in the right direction?
thank you
Gaetan
all the printers are on VLAN 95, when I connect to VLAN 55, the client doesnt see the printers anymore. I can ping them but no more bonjour.
If I had a printer to vlan 55 then I can see it and print to it.
here is what I did so far but still not working:
this is done on our cisco router
I set up ip pim dense-mode on the 2 VLAN interface
ip multicast-routing
on the switches, I enabled snooping
ip igmp snooping.
is this even feasible? if so could someone direct me in the right direction?
thank you
Gaetan
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.