Cisco ASA site-to-site vpn code 8.2

Is there a sample config or video tutorial for a site-to-site VPN for the ASA with code 8.2. Thanks
LVL 1
leblancAccountingAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Pete LongTechnical ConsultantCommented:
From my (OLD) notes.............

crypto isakmp enable outside
      access-list outside_1_cryptomap line 1 extended permit ip 192.168.1.0 255.255.255.0 172.16.254.0 255.255.255.0
      access-list inside_nat0_outbound line 1 extended permit ip 192.168.1.0 255.255.255.0 172.16.254.0 255.255.255.0
      tunnel-group 123.123.123.123 type ipsec-l2l
      tunnel-group 123.123.123.123 ipsec-attributes
        pre-shared-key S3cr3tk3y
        isakmp keepalive threshold 10 retry 2
      crypto isakmp policy 10 authen pre-share
      crypto isakmp policy 10 encrypt 3des
      crypto isakmp policy 10 hash sha
      crypto isakmp policy 10 group 2
      crypto isakmp policy 10 lifetime 86400
      crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
      crypto map outside_map 1 match address outside_1_cryptomap
      crypto map outside_map 1 set  pfs group2
      crypto map outside_map 1 set  peer  123.123.123.123
      crypto map outside_map 1 set  transform-set  ESP-3DES-SHA
      crypto map outside_map interface  outside
      nat (inside) 0 access-list inside_nat0_outbound  tcp 0 0 udp 0

Where 192.168.1.0/25 is behind the ASA, 172.16.254.0/24 is at the other side, and 123.123.123.123 is the IP of the other device toy are connecting to.

Pete
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
leblancAccountingAuthor Commented:
Is there any routing that needs to be configured? Thx
0
mjhangiani2Commented:
Don't have a video. But if you install the Cisco ASDM on your workstation, then you can use the VPN wizard to setup point to point VPN links. It is very straightforward.
0
Pete LongTechnical ConsultantCommented:
>>Is there any routing that needs to be configured? Thx

No if the crypto-map fires the firewall knows to route the traffic to the VPN peer :)

Pete
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Cisco

From novice to tech pro — start learning today.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.