AA095927
asked on
Cloud server printing to a non-windows Thin Client
Have a client that is using a cloud based server/desktop solution (server 2012r2). This solution utilizes a 'remote desktop gateway' and also thin-print (which is really only good for windows clients). There is no VPN here, so the ip of the server will not match the IP range of the LAN
They all have thin clients (non-Windows), mostly Wyse units.
None of the devices have printers locally installed.
I've been told the only way to do this is to do NAT so that each printer we want to setup on the new server is forwarded to a static WAN IP in the office. I've been told to use a different port for each printer.
As a test - using their watchguard firewall- I setup SNAT for one printer showing WAN to internal IP
In firewall rules, I created from ANY to the SNAT I just created allowed on port 11900
On the server, I installed the printer using standard TCP/IP port of 'WAN IP':11900.
This didn't seem to work.
Anyone have any ideas on how to set up the server side that would have each printer going to the same WAN ip address, but using different ports? Does the RAW port need to change from 9100 to 11900? IS the arbitrary port # of 11900 not a good one to use?
They all have thin clients (non-Windows), mostly Wyse units.
None of the devices have printers locally installed.
I've been told the only way to do this is to do NAT so that each printer we want to setup on the new server is forwarded to a static WAN IP in the office. I've been told to use a different port for each printer.
As a test - using their watchguard firewall- I setup SNAT for one printer showing WAN to internal IP
In firewall rules, I created from ANY to the SNAT I just created allowed on port 11900
On the server, I installed the printer using standard TCP/IP port of 'WAN IP':11900.
This didn't seem to work.
Anyone have any ideas on how to set up the server side that would have each printer going to the same WAN ip address, but using different ports? Does the RAW port need to change from 9100 to 11900? IS the arbitrary port # of 11900 not a good one to use?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I am able to setup ONE printer to print from outside the LAN using port 9100.
Because I have 12 printers, I need to setup these up using different ports.
I've tried every combination of raw ports, ip address (with and without the port in the address) and nothing other than port 9100 will work (which means I'd only be able to set up one printer).