Link to home
Start Free TrialLog in
Avatar of Jigs Gaton
Jigs Gaton

asked on

Latest update (15.0.4737.1003) breaks MS Project 2013 Pro: linking not working properly

I have two machines, one with MS Project 2013 Pro at this level: 15.0.4737.1003 and one at this level: 15.0.4727.1003 and linking is not working with the former. See below:

Broken machine:

User generated image
Working machine:

User generated image
If I open the same file on the working machine, all is well, so it's not the file itself that is the problem. Any ideas? All was working well before the last batch of MS updates this week. Now sure what to check now... thx!
Avatar of Dr. Thomas Henkelmann
Dr. Thomas Henkelmann
Flag of Germany image

Hi,

this looks as if the automatic scheduling would be switched off (you find this in File..Options..Scheduling). Please try a forced calculation first (hit the F9 key) to see if this solves the issue. Then set the calculation back to automatic.

Hope this helps

Thomas
ASKER CERTIFIED SOLUTION
Avatar of Jigs Gaton
Jigs Gaton

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Jigs Gaton
Jigs Gaton

ASKER

Turns out the problem was not with MS Project, but with an add-in.