Why doesn't the session have assigned ip address ?

Hi, The below is output of show vpn-sessiondb anyconnect. There are two sessions, which are in the same tunnel-group CCC. Usually the session has two ip address, one is public ip address, another is assigned ip address. In below two session, why does one session not has assigned ip address ? Thank you

Username     : blebovit               Index        : 15804
Public IP    : 66.51.26.6
Protocol     : AnyConnect-Parent
License      : AnyConnect Premium
Encryption   :                        Hashing      : none
Bytes Tx     : 938099441              Bytes Rx     : 30261090
Group Policy : CVA                    Tunnel Group : CCC
Login Time   : 11:53:34 EDT Fri Jul 10 2015
Duration     : 1h:54m:12s
Inactivity   : 0h:15m:57s
NAC Result   : Unknown
VLAN Mapping : N/A                    VLAN         : none

Username     : cfenton                Index        : 12337
Assigned IP  : 172.10.6.16           Public IP    : 73.190.9.68
Protocol     : AnyConnect-Parent SSL-Tunnel DTLS-Tunnel
License      : AnyConnect Premium
Encryption   : RC4 AES128             Hashing      : none SHA1 SHA1
Bytes Tx     : 2686059                Bytes Rx     : 130212627
Group Policy : CVA                    Tunnel Group : CCC
Login Time   : 10:51:9 EDT Wed Jul 8 2015
Duration     : 2d 2h:56m:27s
Inactivity   : 0h:00m:00s
NAC Result   : Unknown
VLAN Mapping : N/A                    VLAN         : none
eemoonAsked:
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

JohnBusiness Consultant (Owner)Commented:
Check the specifications for AnyConnect.  The VPN client applications I use do not support more than one tunnel.

I can find that it certainly does NOT support 2 tunnels for SSL VPN

https://supportforums.cisco.com/document/7651/anyconnect-vpn-client-faq#Q._Does_SSL_VPN_have_the_facility_where_the_user_can_create_two_tunnels_at_the_same_time_and_then_after_accessing_the_network_if_one_tunnel_goes_down_the_VPN_client_can_automatically_shift_the_user_to_the_second_tunnel

and the likelihood is it cannot for any mode.
Steven CarnahanNetwork ManagerCommented:
This can occur when a tunnel is closed but the session is still active.  Say I close my laptop and take it home without first logging off or I have a power outage while connected. Both of those would result in my losing connectivity but since I didn't log off the session remains.

Think of it as similar to being connected to an RDS server.  If you click the "X" or otherwise disconnect without actually doing a logoff then your RDS session goes into a disconnected state. The next time you connect all the applications and documents you had open are still open.

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
eemoonAuthor Commented:
Excellent! I confirmed it. Thank you
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
VPN

From novice to tech pro — start learning today.