leblanc
asked on
cisco 3900 series router LAN ports
I just bough a couple of Cisco 3900 series routers and I see that it has 3 gig ports. But for gig0/1 and 0/2, I see that it is either copper or fiber. I have 2 SX transceivers plug into it. My question is I can use those 2 ports either copper or fiber. Correct? Can I use one with fiber and the other one for copper?
Also, is there a command to see the hardware connection to the ports. On the switch, I use sh int status and I can see the spec for the ports, either copper or fiber. But that command does not seem to work on the router. Thanks
Also, is there a command to see the hardware connection to the ports. On the switch, I use sh int status and I can see the spec for the ports, either copper or fiber. But that command does not seem to work on the router. Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.