TePukeHighSchool
asked on
Vlans on Allied Telesis switch AT-9924SP
Hello . What we really need to do is tag Vlan 30 (voip) all over the switch. We did it for the ports but not for the trunks as we don’t know how to do it. So we aren’t able to send the vlan to the other buildings that are using this trunks or channels. This switch is really old and runs the old OS from Allied Telesis.
AT-9924SP Switch
Can you please tell me how to add Vlan 30 tagged to the Trunks or channels (I am not sure how to call them) . The Vlan needs to be everywhere on the switch.
Vlan 30 VOIP,
These are the current Trunks with the other buildings. Of what I understand.
lacp29 1000 Mbps 4-5 LACP
lacp28 1000 Mbps 7-8 LACP
lacp30 1000 Mbps 1-2 LACP
WH1 1000 Mbps 15-16 Manual
AT-9924SP Switch
Can you please tell me how to add Vlan 30 tagged to the Trunks or channels (I am not sure how to call them) . The Vlan needs to be everywhere on the switch.
Vlan 30 VOIP,
These are the current Trunks with the other buildings. Of what I understand.
lacp29 1000 Mbps 4-5 LACP
lacp28 1000 Mbps 7-8 LACP
lacp30 1000 Mbps 1-2 LACP
WH1 1000 Mbps 15-16 Manual
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
I have recommended this question be closed as follows:
Accept: Predrag Jovic (https:#a40932569)
If you feel this question should be closed differently, post an objection and the moderators will review all objections and close it as they feel fit. If no one objects, this question will be closed automatically the way described above.
frankhelk
Experts-Exchange Cleanup Volunteer