Albert Widjaja
asked on
After upgrading to Windows 10, USB audio SPDIF not working ?
People,
I'm having some problem after successfully upgrading to Windows 10, my USB audio using SPDIF which was working on Windows 8.1 is not working anymore ?
Here's the details:
I'm using Toshiba Dynadock U model with part number PA3575A-1PRP which has SPDIF cable connected to my Amplifier.
I cannot find any driver in http://www.mytoshiba.com.au/support/accessories/port-replicators/pa3575a-1prp/download?os=30 either ?
Here's what It shows in Audio setting:
I'm having some problem after successfully upgrading to Windows 10, my USB audio using SPDIF which was working on Windows 8.1 is not working anymore ?
Here's the details:
I'm using Toshiba Dynadock U model with part number PA3575A-1PRP which has SPDIF cable connected to my Amplifier.
I cannot find any driver in http://www.mytoshiba.com.au/support/accessories/port-replicators/pa3575a-1prp/download?os=30 either ?
Here's what It shows in Audio setting:
Can you get updated drivers from the vendor for this. That is probably the issue. I updated my ThinkPad from Windows 8.1 to Windows 1o and all is well. I had to update drivers on the way by, so that is what you need to do here.
ASKER
Well that's the link from the vendor but it gives me nothing for any OS selections ?
http://www.mytoshiba.com.au/support/accessories/port-replicators/pa3575a-1prp/download?os=30
http://www.mytoshiba.com.au/support/accessories/port-replicators/pa3575a-1prp/download?os=30
Try uninstalling and then restart and instll from your link above.
ASKER
still not working :-|
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
It is Windows 10 issue.
@ ITSystemEngineer - Thanks for following up and I was happy to assist.