asked on Problem with deployment of Windows 7 from usb stick
Hi to all!
Today I have a problem with installation of windows 7x64.
When I install win7 from dvd there are no problems, but If i copy the content of cd to and usb stick, make the partition active and I try to install, the wizard can't find hard disk and ask me to install drivers.
I don't understand why the installation from usb stick have that problem..files are the same of DVD!
Thanks :)
Today I have a problem with installation of windows 7x64.
When I install win7 from dvd there are no problems, but If i copy the content of cd to and usb stick, make the partition active and I try to install, the wizard can't find hard disk and ask me to install drivers.
I don't understand why the installation from usb stick have that problem..files are the same of DVD!
Thanks :)
Windows 7Installation
Last Comment
chiprule
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
You have to enable booting from USB in the BIOS of the computer. Consult the manual on your motherboard on how to do it.
SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
Thanks to all!
@ScottCha i try your solution and it works with no problem
@Josef Al-Chacar i follow the guide in the link and I had a little problem with iso, then i remake iso with Imgburn with filesystem ISO9660+Joliet+UDF and i solve it.
@rindi I have a problem with this procedure. When I put stick, boot stop and give me this error
![20150906_202904.jpg]()
After this I change setting on BIOS but the result is the same
![20150906_202620.jpg]()
Thanks a lot!
@ScottCha i try your solution and it works with no problem
@Josef Al-Chacar i follow the guide in the link and I had a little problem with iso, then i remake iso with Imgburn with filesystem ISO9660+Joliet+UDF and i solve it.
@rindi I have a problem with this procedure. When I put stick, boot stop and give me this error
After this I change setting on BIOS but the result is the same
Thanks a lot!
Boot from a USB 2 port, and not a USB 3 port. I've seen issues like that when USB 3 ports were used.
ASKER
@rindi I think that laptop have only 3.0 usb. How i can verify wich is 3.0 or 2.0?
USB 3 ports are usually colored in blue, while USB 2 ports are black.
ASKER
All ports in my laptop are black, but there are usb 3.0.
At this point I'll try to inject drivers in the iso.
Thanks you so much.
At this point I'll try to inject drivers in the iso.
Thanks you so much.
If you expand "Boot options" on the last screenshot, what are those, and which one is selected?
Can you change the mode from USB 3 to USB 2 in the BIOS?
ASKER
The only thing I can do is "Usb 3.0 confiuration in preos", you can watch details in the image a had posted.