MichaelBalack
asked on
Why the IPSEC Client VPN can't communicate?
This is using Fortigate 80c with firmware 4.3.18. This is regarding about the IPSec client VPN, it was setup and user can connect to it, but, user can not access to any resources in the VPN network. In VPN > Monitor > IPSEC, I saw this client IPSec connection as attached.
Just wondering why the PROXY ID source shows 0.0.0.0 - 255.255.255.255. I was configured so as the Client will get 172.16.1.221 - 240 while the Internal network is 10.0.0.0/24. Appreciate help.
ee---monitor_IPSEC.jpg
Just wondering why the PROXY ID source shows 0.0.0.0 - 255.255.255.255. I was configured so as the Client will get 172.16.1.221 - 240 while the Internal network is 10.0.0.0/24. Appreciate help.
ee---monitor_IPSEC.jpg
ASKER
Hi Vallegd,
But why the client still not able to access any of the office resources?
But why the client still not able to access any of the office resources?
Ok send me the config so I can take a look and fix it up
ASKER
Here you go...
ee---Fortigate_FW80c_20150917.txt
ee---Fortigate_FW80c_20150917.txt
ASKER
Hi Vallegd,
Any updates?
Any updates?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
VPN IPsec setup is done and working fine as stated.
That is completely Ok! you have set the parameters right!
That part of the configuration means that any network would be going to the host(s) or destination9s) that you already configured.
The 0.0.0.0 255.255.255.255 is basically saying that all your networks are permitted !