DHCP Server

How to I configure in dhcp scope .Due to my company IP address is no enough so I plan to using subnet to increase the host. existing DHCP scope is,so I need client to get IP from DHCP server what should I do if the IP is full now?
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

JohnBusiness Consultant (Owner)Commented:
To be clear, you are going to use the range to or roughly 200 addresses. Is this correct?  I assume so. Then just set up clients as DHCP and they will get one of the 200 addresses. It will not be a problem.
YaYangTeahAuthor Commented:
Let said I need 350 IP address what should I do ?
JohnBusiness Consultant (Owner)Commented:
If you need 350 addresses then use - through with a subnet mask of

See this article to assist you   http://www.dslreports.com/faq/15260
Has Powershell sent you back into the Stone Age?

If managing Active Directory using Windows Powershell® is making you feel like you stepped back in time, you are not alone.  For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why.

Hi John,

The useable range for the /23 subnet  would actually be -

Network address
Broadcast address
Subnet mask
JohnBusiness Consultant (Owner)Commented:
The original post wants to start at 1 not 0

If you use the /22 subnet mask your ip scheme would be;
Usable Range: -

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
JohnBusiness Consultant (Owner)Commented:
/23 /22 are just notations and Yayangteah want to start at 192.168.1.x NOT 192.168.0.x. I think you should change your starting point to match the question .

Then he would need to use the /22
JohnBusiness Consultant (Owner)Commented:
For 350 addresses, a person should be able to use to subnet mask of That should work.
JohnBusiness Consultant (Owner)Commented:
I have read that article.
YaYangTeahAuthor Commented:
I am trying play around my home router to simulate the DHCP Scope change from to instead of to

The error has me prompt me and not allow me to change (Bad IP address Pool).Please advise ?
YaYangTeahAuthor Commented:
I change the scope to to ,that was fine ,please advise ?
thats correct, with the subnet mask, you first available ip is, the last available ip is is in separate network ranging from to that is why you received the error.

You will need to change the subnet mask on any computer that has a static ip set.
Qlemo"Batchelor", Developer and EE Topic AdvisorCommented:
lruiz62 is correct. You cannot start at, as any extension of the subnet mask (up to and including /16) leads to a network base address of And with, you cannot use .2 as the same network - you need  (
As said in the other thread (duplicate, and will get deleted), you can add reservation to your DHCP scope to exclude "static" IPs, or just change the scope to start at e.g. or whatever.
Since you are using a non-standard subnet mask, add the subnet mask as a DHCP option to the scope.
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Network Architecture

From novice to tech pro — start learning today.