asked on

Iomega StorCenter px4-300r lost volume after rebuild of raid...

As above. My colleague had replaced the 3rd disk which had failed and now have no more volumes.

Heres the logs:

svcd9079      05/10/2015 09:14            INFORMATION      Drive 3 was removed.
2323      05/10/2015 09:14            ERROR      Drive number 3 cannot be detected.
svcd9108      05/10/2015 09:26            INFORMATION      Drive '3' added.
9046      05/10/2015 09:26            INFORMATION      Verifying the state of storage.
webserver4635      05/10/2015 09:27      domain\dradministrator      INFORMATION      User 'domain\dradministrator' logged in.
4522      05/10/2015 10:20            ERROR      Data may be unavailable due to a failure.
webserver4635      05/10/2015 10:22      domain\dradministrator      INFORMATION      User 'domain\dradministrator' logged in.

Ideas?

ASKER CERTIFIED SOLUTION

Andrew Hancock (VMware vExpert PRO / EE Fellow/British Beekeeper)

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

CHI-LTD

ASKER

Thanks. Rebooted it and its rebuilding again..

SOLUTION

Carlos Ijalba

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

CHI-LTD

ASKER

Thanks, support have pointed me in that direction. the device is now consistently rebuilding and failing.
Remote management console now down, but can ping and access shares.
going to pull data off it and swap the disks as per their support and change file system and rebuild raid...

CHI-LTD

ASKER

they sent two disks in the end as their logs showed another failure..