Issues getting OOB to work, SSH setup on Cisco 3750x

I'm using the FastEthernet0 port on the back of the switch and I have it setup with an IP in our Mgmt VLAN.  I can ping it but can't connect, it seems to be an SSH configuration that I'm failing to do properly.

Switch#ssh 10.11.30.77
% No user specified nor available for SSH client



--------------show run output from 10.11.30.77 - Switch Core--------
interface FastEthernet0
 description OOB Mgmt
 ip address 10.11.30.77 255.255.255.0
----
line con 0
 exec-timeout 45 0
 logging synchronous level 5
line vty 0 4
 exec-timeout 5 0
 transport input ssh
line vty 5 15
 exec-timeout 0 0
 transport input none
-------------
SWCORE01#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
SWCORE01(config)#line vty 0 4
SWCORE01(config-line)#login ?
  authentication  Authentication parameters.

SWCORE01(config-line)#login
------------

I don't know why I don't have "login local" as an option?
sugadminAsked:
Who is Participating?

[Product update] Infrastructure Analysis Tool is now available with Business Accounts.Learn More

x
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Don JohnstonInstructorCommented:
Here's the quick and dirty guide to getting SSH up and running.
enable secret supersecretpassword
username homer password simpson
hostname Cisco-Device
ip domain-name something.com
crypto key generate rsa
line vty 0 4
 transport input ssh

Open in new window


Some of these are steps that you've already done (or should have).
sugadminAuthor Commented:
I found that I can SSH to the switch but, only from within that network/VLAN.  I assume that this is the way it's supposed to be since there is no GW set and I don't see and option for it in Interface Internet Protocol config commands
Don JohnstonInstructorCommented:
Correct.  If there's no gateway set or routing isn't enabled for that network, you won't be able to communicate to the switch from a different network.

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Network Management

From novice to tech pro — start learning today.