I have a client with a RV320 who wants the following:
To be able to have RDP from external source to 2 separate desktops, the desktops have static IPs.
My aim is to provide 2 external ports to map to the relevant internal IP addresses. I have done this very simply with other routers but this router is baffling me.
so, the question.
how do I set up NAT (or whatever cisco call it on this router) to allow:
RDP connection to external-IP:63389 to NAT to internal IP 192.168.11.130 obviously on port 3389
RDP connection to external-IP:63390 to NAT to internal IP 192.168.11.131 obviously on port 3389