asked on
Terminal server only accepts LAN connections. WAN connections fail after P2V conversion
Ran a p2vhd conversion on a Server 2008R2 terminal server.
Mounted the VHDX in Server2012 HyperV. Booted fine. Changed the IP to the same IP as the Physical Machine.
I am able to connect via RDP from various points on the LAN but not through the firewall. The same NAT rule is in place that was working before.
I did check the ARP table on the ASA 5505 and it does list the correct MAC for the VM NIC. It can ping the VM from the ASA.
Any ideas?
Mounted the VHDX in Server2012 HyperV. Booted fine. Changed the IP to the same IP as the Physical Machine.
I am able to connect via RDP from various points on the LAN but not through the firewall. The same NAT rule is in place that was working before.
I did check the ARP table on the ASA 5505 and it does list the correct MAC for the VM NIC. It can ping the VM from the ASA.
Any ideas?
CiscoHyper-VWindows Server 2008Windows Server 2012
Last Comment
YMartin
ASKER CERTIFIED SOLUTION
Log in or sign up to see answer
Become an EE member today7-DAY FREE TRIAL
Members can start a 7-Day Free trial then enjoy unlimited access to the platform
or
Learn why we charge membership fees
We get it - no one likes a content blocker. Take one extra minute and find out why we block content.
Not exactly the question you had in mind?
Sign up for an EE membership and get your own personalized solution. With an EE membership, you can ask unlimited troubleshooting, research, or opinion questions.
ask a questionYour help has saved me hundreds of hours of internet surfing.
fblack61