LingerLonger
asked on
Meraki MR26 Red LED
Working with a Cisco Meraki MR26. Just received an RMA Unit to replace one that was failed. Plugged it in to the LAN, front LED flashes Green a couple times, then goes solid Red. I cannot find anything in the documentation that discussed a Red LED condiiton - Orange, Rainbow, Blue, Green are detailed in https://docs.meraki.com/display/MR/MR26+Installation+Guide#MR26InstallationGuide-LEDIndicatorsandRunDarkMode, but nothing for Red.
Support hasn't suggested anything either, figured I'd turn here. Anyone with any experience on what this means?
Support hasn't suggested anything either, figured I'd turn here. Anyone with any experience on what this means?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Real single-wavelength orange LEDs are expensive, so I assume it is mix of yellow and red with yellow not lit.
If you have spectrometer or glass prism and sheet of paper you can check.
If you have spectrometer or glass prism and sheet of paper you can check.
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER