Technical Information
asked on
Testing Bandwidth restrictions on VLANs
Whats the best way to test Bandwidth restrictions. I have set HTTP and HTTPS restrictions on a watchguard firewall on 4 different VLANs.
Will a speedtest.net test not work?
Thanks
Will a speedtest.net test not work?
Thanks
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Thanks for the points. I'll have to get back to you on adding port 8080. I never worked on a Watchguard firewall. What level of firmware/software is your firewall running?
Generically there should be some type of definition of what ports are included as http/https traffic and you would add port 8080 to that definition.
You might want to dump the configuration file and look for any definitions/parameters that have http or port 80 in them and go from there.
Generically there should be some type of definition of what ports are included as http/https traffic and you would add port 8080 to that definition.
You might want to dump the configuration file and look for any definitions/parameters that have http or port 80 in them and go from there.
ASKER
Would you know how to add port 8080 to an existing HTTP policy?