Dawin Daise
asked on
Hyper-V Issues
I have new server running Server 2012 r2. We will be using this server to host a number of VM'S. I have been trying to do a P2V from 2 Server 2008r2 boxes that I have. To do this I am using the Disk2VHD tool with both the VHXD and Volume Shadow options selected. After creating the VHD's, I can successfully create new VM's in Hyper-V Manager without any issues. When I power them on that's when all of my nightmares begin. One of the VM's won't boot into windows. I continue to get the following error: Boot failure. Reboot and Select proper Boot device or Insert Boot Media in the selected Boot device.
The second VM will boot just fine until I reboot. After I reboot the VM I continue to get a Mouse not captured in Remote Desktop session. It tells me that must install the Integration Services. I go to install the Integration Services and I receive the following error: A previous installation of Hyper-V Integration Services has been detected (Version 6.1.7601.17617). Click ok to upgrade. After I upgrade, the VM blue screens on me and I can't see the error because the blue screen just continues to loop on me.
The second VM will boot just fine until I reboot. After I reboot the VM I continue to get a Mouse not captured in Remote Desktop session. It tells me that must install the Integration Services. I go to install the Integration Services and I receive the following error: A previous installation of Hyper-V Integration Services has been detected (Version 6.1.7601.17617). Click ok to upgrade. After I upgrade, the VM blue screens on me and I can't see the error because the blue screen just continues to loop on me.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Try the tool that Andrew suggests; Disk2VHD - though I've found it USUALLY works - is NOT a supported method of P2V.
ASKER
Andrew
Thanks for your response. I did as you suggested and installed the Virtual Converter 3.1 but I got a couple of error messages. I have attached the log.
Thanks again for your help.
Log.txt
Thanks for your response. I did as you suggested and installed the Virtual Converter 3.1 but I got a couple of error messages. I have attached the log.
Thanks again for your help.
Log.txt
Have you tried creating a Generation 1 and a Generation 2 for both VMs to see if it's a generation issue?