Link to home
Start Free TrialLog in
Avatar of Mike Roe
Mike RoeFlag for United States of America

asked on

Hp procurve 1810 VLAN

Can anyone help me do a VLAN for phones and a network on two hp procurve 1810 48 port switch.

I have two switches that need to have a link between them for vlan traffic and network traffic.

I have VLAN 1 as default and VLAN 50 as the phone vlan.  The phones are going to plug into the wall and the computer is linked to the phone to pass network traffic.  The system is a Shoretel system.

I also have a DHCP server to give out ip address to the phones which i have on port 21 on vlan50.  Port 22,23,24 are the shoretel system.  

What do i need to do so the network and phones will be set so I do not have ip addresses going to network that should be going to phones.  Also what do i need to do so the network will continue to run like it does now with adding the phones to the network.  

HP is a pain to deal with related to tags etc.

I have a watchguard XTM 515 doing the routing for the networks.

Thanks
vlan50.jpg
vlan1.jpg
ASKER CERTIFIED SOLUTION
Avatar of Uros Gaber
Uros Gaber

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Avatar of Mike Roe

ASKER

This worked only thing i had to do was exclude the server port on vlan1 so my specific subnet ip addresses from dhcp server only went to phones and not to all the computers in the network.