BBrayton
asked on
Setup VPN on Server 2012
I installed all the roles and features that the server needs for VPN.
Does anyone have step by step instructions on how to configure VPN access on a 2012 server.
I opened ports 1723 and 47 on the firewall router
Does anyone have step by step instructions on how to configure VPN access on a 2012 server.
I opened ports 1723 and 47 on the firewall router
This walks you through it on the server end.
ASKER
I did all the steps.
I just did a port scan on the wan and port 1723 is not open.
Its Juniper SSG5 router and its a pain to open ports.
I just did a port scan on the wan and port 1723 is not open.
Its Juniper SSG5 router and its a pain to open ports.
ASKER
I did forward port 1723 to the Server I setup VPN on.
I called their ISP and their network is not blocking any ports.
I called their ISP and their network is not blocking any ports.
I can't help you much on the Juniper end as I've never worked with their equipment but you may want to ensure that the appropriate ports have been opened on the host based firewall as well, probably not the issue but it wouldn't hurt to look.
ASKER
ok i finally connected trough VPN.
Now there is a different issue.
I am not able to rdp or ping any PC's or server on the network
Now there is a different issue.
I am not able to rdp or ping any PC's or server on the network
I'm assuming you are pinging/rdping from inside the network? When you ping/rdp are you using the hostname or the IP?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Good to hear, glad you got it figured out!
ASKER
Figured it out by myself