HP DL380

ITsolutionWizard
ITsolutionWizard used Ask the Experts™
on
I purchased HP DL380 and try to install window server 2012 from USB drive.
I tried to put it boot as USB but it is still not working any ideas?
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®

Commented:
See step 2 of this guide to make sure you created the bootable USB media correctly

http://www.helpdesk360.com/articles/13165/
Most Valuable Expert 2015
Commented:
Which generation of DL380? New HP server generations have something called "Intelligent Provisioning". This is a similar tool as the previously provided SmartStart CD, but integrated into the system. You should use that to prepare your server for the OS (setup the RAID array, select the OS etc), and then you can also select the installation source for the OS. Check your manual for how to use intelligent provisioning. I strongly recommend using that rather than doing a manual install, as it will also include the correct drivers management agents and utilities.

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial