kenmore   66517772990 dishwasher  checkvalves

ammarker
ammarker used Ask the Experts™
on
I am reinstalling parts for this dishwasher.  It appears to have three check valve balls and not the two I expected.  One is smaller than the other.
In what order do I replace them?
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Moussa MokhtariEnterpreneur
Top Expert 2016

Commented:
Hi ammarker,Could you provide us with photos .
Most Valuable Expert 2013
Commented:
If you have the whole pump disassembled then you'll have three balls the two largest go together as a pair in the main check valve as shown in the link below.

http://www.searspartsdirect.com/model-part/66515819990/0582/0130000/p9100305/00004.html
JohnBusiness Consultant (Owner)
Most Valuable Expert 2012
Expert of the Year 2018
Commented:
There should only be one check valve (to prevent dishwater from back flow to the water line. But there is also an inlet valve. I think the parts you might want are shown here.

http://www.repairclinic.com/Shop-For-Parts/a9b6c37d638613/Model-66517772990-Kenmore-Dishwasher-Valve-Float-Parts

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial