Thompson TG789vn Firewall

soffcec
soffcec used Ask the Experts™
on
I need to open the WAN port for http, ping and telnet for certain ip addresses on my routers (TG589,789)


e.g firewall config something
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
Chris HInfrastructure Manager

Commented:
HTTP - port TCP 80    
PING - port ICMP 0
telnet - port TCP 23


You need to create individual port forwarding rules to each device for the respective ports.
http://www.pcwintech.com/port-forwarding-thomson-tg789vn-thomson-firmware
soffcecManager

Author

Commented:
I need example not link or port forwarding (only accessing router itself)

firewall config state=enabled keep=disabled tcpchecks=none udpchecks=enabled icmpchecks=enabled logdefault=disabled logthreshold=enabled tcpwindow=65536
firewall rule add chain=sink_fire index=1 name=rule1 srcintf=wan srcip=794.354.345.524 log=disabled state=enabled action=accept
Manager
Commented:
Found out with config from another router.
soffcecManager

Author

Commented:
as I stated

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial