baysysadmin
asked on
Nagios 4.0.8 ack_no_sticky=1 not working
I found this setting to change the default acknowledge check box in the cgi.cfg but its not working for me after adding this line. Any ideas
ack_no_sticky=1
# DEFAULTS FOR CHECKBOXES FOR ACKNOWLEDGEMENTS
# Enabling ack_no_sticky will default the "Sticky Acknowledgement" to
# be unchecked.
# Enabling ack_no_send will default the "Send Notification" to
# be unchecked.
#ack_no_sticky=0
#ack_no_send=0
ack_no_sticky=1
# DEFAULTS FOR CHECKBOXES FOR ACKNOWLEDGEMENTS
# Enabling ack_no_sticky will default the "Sticky Acknowledgement" to
# be unchecked.
# Enabling ack_no_send will default the "Send Notification" to
# be unchecked.
#ack_no_sticky=0
#ack_no_send=0
ASKER
Do you know where this file is located?
"Can you double check line 449 in cgiutils.c? It looks like there is a curly brace instead of the line you meant to put there."
its not in /usr/local/nagios
"Can you double check line 449 in cgiutils.c? It looks like there is a curly brace instead of the line you meant to put there."
its not in /usr/local/nagios
It's located in Nagios source files that you have to download compile and finally run it. Like I said you best bet is a Nagios upgrade anyways.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Just a follow up if you require anything further.
ASKER
Ill assuming your suggestion about upgrading will fix the issue.
But we wont be doing it, we are moving way from nagios.
Thanks
But we wont be doing it, we are moving way from nagios.
Thanks
Thats ok, different tools for different people :)
https://support.nagios.com/forum/viewtopic.php?f=7&t=33407