Bill H
asked on
Cisco 8.4 Port Forward
Hey Guys, i have a Cisco ASA 5505 and a DVR behind the firewall. The ip of the cams is 10.1.10.150 and i need ports 80, 8000, and 10554 open
-I created 3 different Camera objects, with the host as 10.1.10.50
-i performed nat (inside,outside) static interface service tcp for the 3 ports
-i updated the access list to permit tcp any host 10.1.150 eq the 3 ports
-i made sure access-group applied to the Outside interface
It does not seem to work, what am i missing?
-I created 3 different Camera objects, with the host as 10.1.10.50
-i performed nat (inside,outside) static interface service tcp for the 3 ports
-i updated the access list to permit tcp any host 10.1.150 eq the 3 ports
-i made sure access-group applied to the Outside interface
It does not seem to work, what am i missing?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Hi There,
Could you post the related config?
The below statement is confusing:
The ip of the cams is 10.1.10.150 and i need ports 80, 8000, and 10554 open
How many cameras are we looking at out here?
Could you post the related config?
The below statement is confusing:
The ip of the cams is 10.1.10.150 and i need ports 80, 8000, and 10554 open
How many cameras are we looking at out here?
Can you please post your sanitized config?
ASKER
Nope, no other port forward nats configured.