SunnyX
asked on
Cannot get access to the internet through the NetGear GS105v5 and my router D-link DIR-300
Hi dear experts,
GS105V5 unable to connect to router
1. I install Prosafe Plus Configuration Utility for GS105 ( not sure that for the GS105v5 because didn't find such )
2. Accept all Windows firewall notification that pumps up
3. Plug in on cable to my working router ( D-link DIR-300 ) and one to my PC ( win 8.1. )
4. Power Up NetGear GS 105 ( it was done at first place )
5. Also donwload GS105Ev2_V1.4.0.6 zip but don't know how to install it
6. Reboot my PC
7. Reboot my DIR-300
8. Yes, I forgot to mention that I start up ProSafe Plus Config Utility press refresh button and the app said to me "No switch exist in the local area network! "
and still can access internet only through DIR-300 wi-fi the Win gives me notification in "NetWorks " "Connections" - Unidentified network
What should I do in order to get access to the internet through the GS105v5 in my case ? All cables are working they short (1 meter ) . Connection to the internet provided by the DIR-300 through wi fi is working all the time. My operation system is Win 8.1. Should I install something ? Like the GS105Ev2_V1.4.0.6 or something ?
for me info please take a look on this pdf
https://drive.google.com/file/d/0B-2xpKXuvT70RzB6ckpPVHptRk0/view?usp=sharing
There is the YT video where some guy just plug-in and play what I did wrong ?
https://www.youtube.com/watch?v=KBHyDd2cJBs
Regards,
Sunny
GS105V5 unable to connect to router
1. I install Prosafe Plus Configuration Utility for GS105 ( not sure that for the GS105v5 because didn't find such )
2. Accept all Windows firewall notification that pumps up
3. Plug in on cable to my working router ( D-link DIR-300 ) and one to my PC ( win 8.1. )
4. Power Up NetGear GS 105 ( it was done at first place )
5. Also donwload GS105Ev2_V1.4.0.6 zip but don't know how to install it
6. Reboot my PC
7. Reboot my DIR-300
8. Yes, I forgot to mention that I start up ProSafe Plus Config Utility press refresh button and the app said to me "No switch exist in the local area network! "
and still can access internet only through DIR-300 wi-fi the Win gives me notification in "NetWorks " "Connections" - Unidentified network
What should I do in order to get access to the internet through the GS105v5 in my case ? All cables are working they short (1 meter ) . Connection to the internet provided by the DIR-300 through wi fi is working all the time. My operation system is Win 8.1. Should I install something ? Like the GS105Ev2_V1.4.0.6 or something ?
for me info please take a look on this pdf
https://drive.google.com/file/d/0B-2xpKXuvT70RzB6ckpPVHptRk0/view?usp=sharing
There is the YT video where some guy just plug-in and play what I did wrong ?
https://www.youtube.com/watch?v=KBHyDd2cJBs
Regards,
Sunny
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
If you RTM... just plug it into your router. Plug your computer into the switch. Done. This model has auto-MDIX for uplink ports, so you shouldn't need to do anything special. No special cables. No switches to configure.
When you try to run a configuration utility, it my be altering your network connection in order to connect to a pre-configured address/port on the target piece of equipment.
What is your reason for trying to configure a dumb Layer 2 switch?