Armitage318
asked on
Moving host from one VMware cluster to another
Hi,
I need to move one host from one cluster (VMware 5.0) to a new one (VMware 6.0); both share same SAN (Dell MD3200) through iSCSI.
I am going to enter in maintenance mode for it, and reinstall VMware from scratch.
While it's not mandatory for me, I'll preserve IP address / hostname for this host.
Is there anything that I have to consider before attaching this host to new cluster?
Should I first delete and add again on "host group" in Power Vaul Modular Disk Storage Manager?
Thank you
I need to move one host from one cluster (VMware 5.0) to a new one (VMware 6.0); both share same SAN (Dell MD3200) through iSCSI.
I am going to enter in maintenance mode for it, and reinstall VMware from scratch.
While it's not mandatory for me, I'll preserve IP address / hostname for this host.
Is there anything that I have to consider before attaching this host to new cluster?
Should I first delete and add again on "host group" in Power Vaul Modular Disk Storage Manager?
Thank you
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.