AXISHK
asked on
DHCP relay on Sonicwall
We have used DHCP service on Sonicwall to lease IP addresses to a LAN and wifi subnet.
Recently, we have setup a Window DHCP services. How can I configure the Sonicwall such that it will use the Window DHCP for both LAN and Wifi subnet ? Any example for reference.
Thx
Sonicwall.png
Recently, we have setup a Window DHCP services. How can I configure the Sonicwall such that it will use the Window DHCP for both LAN and Wifi subnet ? Any example for reference.
Thx
Sonicwall.png
You need to set SonicWALL LAN and WAN in Layer-2 Bridged mode.
https://support.software.dell.com/kb/sw8736
https://support.software.dell.com/kb/sw8736
In the sonicwall it's under ip helper. Here is a write up direct from dell (sonicwall) https://support.software.dell.com/kb/sw3793
Layer-2 bridged mode? No that's just wrong.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Thx
Indeed you need to create IP Helper policies.
Go to Network>IP helper
Enable IP Helper
Enable DHCP protocol
add a policy with src = the subnet or interface
and destination the DHCP server
View more example configurations and the SonicWALL webui and features on http://livedemo.sonicwall.com or http://ngfw-demo.com
Go to Network>IP helper
Enable IP Helper
Enable DHCP protocol
add a policy with src = the subnet or interface
and destination the DHCP server
View more example configurations and the SonicWALL webui and features on http://livedemo.sonicwall.com or http://ngfw-demo.com
Disable the SonicWall DHCP server and you should be good.